bing tracking image
Q & A Icon

Can Dexstar Conventional Steel Wheel with Offset Fit 1962 Studebaker Lark  

Updated 10/22/2026 | Published 10/21/2026

Question:

Can I use Dexstar Conventional Steel Wheel with Offset - 15 x 6 Rim - 5 on 4-1/2 Part Number: AM20504 on a car? 1962 Studebaker lark. Thanks

0

Expert Reply:

Hey David, welcome back! While he Dexstar Conventional Steel Wheel part # AM20504 was intended to be used on trailers we have found that many people have been able to use it on older vehicles like what you have. This has a 5 on 4-1/2 inch bolt pattern and an offset of +.5 inch so as long as that matches what you would need it will work for you. Are you wanting a baby moon cover as well?

expert reply by:
0
Jameson C
David B. profile picture

David B.

10/21/2026

Thanks for the fast reply, I've made my order. I will use a full wheel cover "Hubcap" on this wheel.

Jameson C. profile picture
Etrailer Expert

Jameson C.

10/21/2026

@DavidB glad to help!!
Mike profile picture

Mike

10/22/2026

I used them for my 1962 Ford Fairlane and they work excellent, better than factory. Just be extra careful installing the wheel evenly with the lug nuts because they will be lug centric now and not hub centric. I torque to no more than 90 lbs with new DORMAN lug nuts.

Jameson C. profile picture
Etrailer Expert

Jameson C.

10/22/2026

@Mike thanks for sharing that feedback!
Mark K. profile picture

Mark K.

10/22/2026

I used them on a 2000 Jeep Wrangler. I had to enlarge the hub size; however, it wasn't a bad job. I built a jig and used a hole saw. They work great.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>