Will Upgrading From a 45 Amp to 60 Amp RV Converter Require Rewiring
Updated 10/20/2026 | Published 10/18/2026 >
Products Featured in This Question
Question:
I currently have a 2017 Winnebago View with a progressive dynamics PD 9245C converter. I think it would be a direct swap for the PD 9345 but I’m wondering if I can go to the PD 9360 without swapping wires for a larger gauge
asked by: Timothy f
Expert Reply:
Hey Timothy, welcome back! Yes, the Progressive Dynamics 9300 Series Converter # PD69RR (PD9345) is a direct replacement for your existing PD9245C. You can also upgrade to the 60-amp # PD79RR (PD9360), but more than likely you'll need to upgrade your wiring as well. I would expect Winnebago used wiring sized for the original 45-amp converter.
You'll need to verify your existing wire gauge and compare it to Progressive Dynamics' recommendations for the 60-amp converter. They recommend 6 AWG for runs under 10', 4 AWG for 10' to 15', and 3 AWG for runs over 15'. If your existing wiring meets these requirements, you won't need to replace it. Otherwise, I'd stick with the 45-amp # PD69RR unless you want to run new wiring.
Are you upgrading to lithium batteries or just looking for faster charging?

Dan
10/20/2026
Our converter was very much outdated. I called Progressive Dynamics and asked if I could move up to a 60 or 75 amp converter. They strongly recommended to stay with the 9345 because of the 8 guage wiring in our 5th wheel. So far it’s working great. Our wet cell batteries are staying charged without boiling. Stay with the size your rv came with and enjoy and get out and enjoy what you have.

Product Page this Question was Asked From
Progressive Dynamics 9300 Series RV Converter Charger - 12V - 45A
- Power Converter
- Converter Only
- Manual Switch
- 12V
- 45 Amps
- AC to DC
- AGM
- Lead Acid
- Lithium
- RV
- Multi-Stage Charge
- Progressive Dynamics
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Converter for PD9245C that is Lithium Battery Compatible
- Q&A: Is etrailer Part # PD69RR the Progressive Dynamics PD9345V Converter Charger?
- Q&A: Replacement Lithium Compatible Converter Charger for a Inteli Power 9100 PD9140a
- Q&A: What is Difference Between 45 amp and 60 amp Progressive Dynamics Converter Chargers
- Q&A: Will Progressive Dynamics 9200 Converter Work with a Lithium Battery?
- Q&A: 45 Amp Converter with Charge Wizard Needed for RV and Lithium Batteries
- Q&A: Lithium Compatible Converter To Replace WFCO WF-9855
- Article: Trailer Wiring Diagrams
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How Many Batteries Do You Need to Run an RV Air Conditioner?
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: What Size Generator Do You Need to Run an RV Air Conditioner?



Bob S.
10/20/2026
The converter on your View feeds the DC bus bar which has a 40A breaker. It is possible the 60A converter will trip that breaker under maximum charging. Even after line loss, you will be exceeding 40A.