bing tracking image
Q & A Icon

Looking For Replacement Electric Entry Steps For 2006 Monaco Monarch SE - 3 Step 24" Wide  

Updated 10/06/2026 | Published 10/05/2026

Question:

I have a 2006 MONACO MONARCH SE and I want to replace the old worn-out step but for my rig you list 3 different ones - I need help to get the correct one. Its 3 step, 24 wide, bolts to the frame under the door not sure what other info you need I looked and there is no info tag anywhere only number is on the control box S/N 1817128

0

Expert Reply:

Hey Don, thanks for the information!

For your 2006 Monaco Monarch SE, the 24" wide 3-step setup points us toward the Kwikee 25 Series, but I would still verify a couple of measurements before ordering.

If you want to replace the entire step system, the Kwikee complete assembly # LC3658373 is the option I would look at. It includes the steps, motor, control unit, switch kit, and light. It uses a 23-3/4" x 11-3/8" mounting plate with a 22" x 8" bolt pattern and is designed for an entry height of about 27-7/8" to 29-7/8".

If your existing motor and controls are still good and you only need to replace the worn-out physical steps, the replacement step frame is # LC3658374. This is the 24" wide 3-step frame only and is designed to reuse the existing 25 Series motor and controls, assuming that is what you have.

Before ordering, I would compare the mounting dimensions and measure the entry height from the ground up to the mounting location. That will let us confirm which setup is the best fit.

expert reply by:
0
Andrew N

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>