Does Curt TriFlex NEXT Brake Controller Have to be Calibrated When Vehicle Is Turned Off
Updated 05/20/2020 | Published 07/30/2014
Question:
Does the Curt TriFlex Trailer Brake Controller need to be recalibrated each time you tow or turn off the tow vehicle engine? Thanks
asked by: Dan
0
Expert Reply:
Nope, the Curt TriFlex NEXT # C24VV will not have to set up and be recalibrated when the vehicle is turned off, it will keep the settings you use.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Plug-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LCD Display
- Single Trailer Only
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Curt TriFlex NEXT Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Shop: Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Shop: Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - Up to 4 Axles - Proportional
- Q&A: Curt C24VV TriFlex Brake Controller Putting Out Minimal Voltage With Vehicle Brake Pedal Applied
- Q&A: Curt Spectrum Brake Controller for 2020 Honda Ridgeline
- Q&A: Recommended Trailer Brake Controller for a 2023 Honda Ridgeline
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Q&A: Recommended 7-Way Connector and Brake Controller for a 2015 Toyota Highlander
- Q&A: Weigh Safe True Tow Weight Distribution System For 7,600 Pound Trailer
- Q&A: Amp Draw on GE Appliances Deluxe RV AC System
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Looking for a Replacement Slide Out Motor for Lippert Model 676791
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: Trailer Wiring Diagrams
Greg W.
5/17/2020
My brake controller always read output3.0 when i applied my brakes. Now it varies all over the board with the same trailer a camper attached. 1.0 to 1.3 1.5 never the regular number I was used to seeing. Also i try to adjust the wheel and the numbers are all over the board. do i need to power down the controller to make it loose memory?