bing tracking image
Q & A Icon

Do Pontoon Deck Self Tapping Screws Require Pilot Hole When Redoing Wood Deck On Trailer ?  

Updated 09/29/2026 | Published 09/28/2026

Question:

The tx30 brown coated torx screws that were two and a 1/4-in on your site required a 7/32 pilot hole even though they are an f7 self tapper Do these require a 7/32 hole as well?

0

Expert Reply:

Hey Don, good question.

The Replacement Self-Tapping Pontoon Deck Screws - Stainless Steel - Qty 100 # JIF78VR are self tapping and do not require a pilot hole. The 2-1/4" Long Torx; Floor Screws, 40/Pkg # TF01225 do require the 7/32" pilot hole as you mentioned.

In my opinion, I'd lean towards the pontoon deck screws since they are going to get the job done a lot quicker, and they are stainless steel to prevent corrosion a bit better. Either option will work though.

Was the old wood rotting quite a bit? I've been staining and sealing my car hauler wood deck once a year in hopes it lasts a long time.

expert reply by:
0
Andrew N
Don profile picture

Don

9/29/2026

In my case for the ATV aluminum trailer from Triton, the original plywood was marine grade and it held up very well through the extreme weathers of New York State. I moved to Florida 7 years ago though so on top of the weathering from New York state it had the sun baked moisture and humidity driven climate from Florida to deal with. So I would say that I definitely got its life. I think I am going to skip marine grade plywood because it is still susceptible to rot which is the whole new issue here in Florida. Leaning toward treated exterior plywood treated with an oil base stain and penetrant.

Andrew N. profile picture
Etrailer Expert

Andrew N.

9/29/2026

@Don Okay that makes sense. Yeah those humid climates can really eat at the wood, and unfortunately, metal too. I think your treated plywood with stain/sealant is a good option. Let me know how it goes and good luck!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>