Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Different trailers sit at different heights, and that can throw your setup off balance. The stacked receivers on this hitch give you up to a 10" drop or 10" rise, letting you fine-tune the ball height in 2-1/2" increments. Once you lock it in with the included pins, your trailer sits level and tracks straight no matter what you’re hauling.
Heavy loads call for serious gear. This mount is built from heavy-duty steel and rated for a maximum towing capacity of 30,000 lbs with a 3,000-lb tongue weight limit. It’s ideal when you need reliable pulling power for large trailers or equipment without worrying about flex or failure.
Swapping trailers gets easy when everything’s built into one setup. The removable 3-ball mount gives you 1-7/8", 2", and 2-5/16" hitch balls, so you can match any standard coupler without changing mounts. There’s also a built-in pintle lock for lunette ring couplers and a tow hook for recovery use—ready for whatever type of connection the day calls for.
Nobody likes hearing gear clunking on the road. This setup includes anti-rattle bolts built right into the drop hitch to reduce vibration and keep things solid. The result is a smoother, quieter pull whether you’re loaded heavy or just heading out with an empty trailer.
Road salt and grime can chew through cheap finishes fast. This mount’s textured black powder coat keeps the steel protected from rust and corrosion over the long haul. The matching black D-ring, pins, and clips keep it looking clean while delivering dependable strength trip after trip.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer. Let's take a quick look at this Patriot Hitches Three Ball Mount with Stacked Receivers. Now this drop hitch with stacked receivers has been designed by a US military veteran to slide into your two and a half inch trailer hitch receiver and give you really the ultimate adjustability. This is going to give you multiple two inch receivers. So you're gonna be able to mount your ball mount, which we have a three ball mount, obviously, included with this for your bike rack or cargo carrier, all of various heights.
This is going to give you a gross towing weight of up to 30,000 pounds. When you have it in this orientation, you're gonna get a maximum drop of about 10 inches. When you flip it over, a maximum rise, again, of about 10 inches. And you're gonna get an incremental height adjustment of about two and a half inches. So these stacked receivers are going to give you a rise or a drop that's going to match the height of your particular use case or application.
And you're gonna be able to also use this with a pintle lock or with your own accessories, which is nice. So this will fit lunette rings from two and a half inches or three inches. So you'll just drop your lunette ring over the ball, bring this out like you see it right here. And that's gonna go over the lunette ring and you'll be able to use that as a pintle hook. A pintle hitch, rather, attachment.
So really flexible in that way. The D-ring is a three quarter of an inch D-ring that's gonna allow for multiple off-roading and recovery uses. And of course, you're gonna get your one and seven eighths inch, two inch, and two and five 16ths inch ball. It's gonna be very easy to swap between those ball sizes. You'll just remove the pin and the clip and remove the ball platform.
Turn it to where you need it, secure it back with the pin and clip, and you'll be good to go. Now you're also able to use this in many different ways, one of which is you can use this as a hitch dip. A hitch step, rather, when you rotate it. And on this product page, we do talk a little bit more about the many other different ways in which you can use this. You're also going to get these locks, and you get four of these locks with this kit, which is great. So you're gonna be able to secure your attachments, or secure this to your trailer hitch receiver. You're gonna get four keys. Everything is keyed alike, so it's gonna be very easy to use. As you can see, it's gonna slide right through, and then you'll just lock it. So very easy to use. But man, what a great addition, these locks here. You're gonna get a cap here to protect that keyway from debris, moisture, things like that, so the keyway will stay nice and clean. So it includes everything that you see here. You can use the standard pins and clips that's included, or the hitch locks, whichever is gonna be best for you. This is sturdy and dependable. This is a constructed of a solid steel construction. It's covered in a durable texture powder coat for rust resistance. You're also going to get these stainless steel bolts that's gonna keep your accessories from moving or vibrating. You'll just insert them and tighten them here with the included tool, with whichever attachment or accessory that you're gonna be using, so it's gonna secure everything into place. And then another thing I wanted to mention, and you probably already saw it, is this great case. This includes this tactical case, I believe it's officially called. I'm just gonna pop this open and hopefully you can get a good view there. You've got a cutout in this really great foam. It's high quality foam for every piece of this kit. So this is going to not only keep everything together in the back of your truck or wherever you store your equipment, but it's going to keep it protected. You're gonna keep have everything in one place. It's got a handle on here as well. So it's pretty durable plastic as well. So everything is going to go in this. This little container here is gonna be for the smaller parts that's included here, and then that will go in here as well. So overall, I'm really impressed with all of the great accessories that this comes with. You're literally going to be able to get this out of the box and use it without really any extra concern whatsoever. Everything is gonna be included for you. Really, again, a great textured finish on here that I think is gonna hold up really well for you. Instructions are gonna be included as well to make sure that you're using it the way that it's been designed. I think I'm gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Jean
7/23/2022
Couldnt ask for a better hitch, it pull all our toys, its great since my truck is already lifted. Works great.