bing tracking image
Q & A Icon

Looking for Replacement Power Cord for 2007 Aliner LXE  

Updated 09/28/2026 | Published 09/24/2026

Question:

Hi there, I’m trying to replace the power cord on my 2007 Aliner LXE with a detachable cord and power inlet. It’s rated at 30 amps. The problem I’m having is the whole seems oversized for the bulkheads. Do you have a model that could cover an approximate 4” hole, or make a weather tight cover plate that would work? A10-30INBKVP

0
Hole in Wall
Hole in Wall
(click to enlarge)

Expert Reply:

Hey Del, the cleanest solution would be to make a weatherproof adapter/backing plate larger than the existing opening—something around 5" x 5" would give plenty of overlap. Aluminum, stainless, or a UV-resistant exterior plastic such as ABS would work. Seal the plate to the Aliner wall with butyl tape/sealant like part # AL64UV, then cut the approximately 2-7/8" opening in the center of the plate and mount #A10-30INBKVP to that.

expert reply by:
0
Jameson C
Del profile picture

Del

9/25/2026

Hey Jameson, thanks for your prompt and professional response. I’ll look into the options you suggested. Regards, Del

Jameson C. profile picture
Etrailer Expert

Jameson C.

9/28/2026

@Del glad to help!
Ty profile picture

Ty

9/26/2026

Del, I bought the same power inlet you are considering to replace the cheesy non weatherproof power cord access cover that came on my Viking travel trailer. I mounted it the same way Jameson suggested. I used a piece of Azek PVC trim sealed and mounted over existing hole and mounted new power inlet to that. No more water intrusion!! Good luck,Ty

Jameson C. profile picture
Etrailer Expert

Jameson C.

9/28/2026

@Ty great feedback thanks!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>