Replacement Brakes for 2015 Jayco X254
Updated 09/03/2026 | Published 09/01/2026
Products Featured in This Question
Question:
Which brake assembly do I need for a Dexter Axle 10? I have a 2015 Jayco x254 with dual axles. Im looking to replace the brakes all around. Thanks!
asked by: James E
Expert Reply:
Hey James! Thanks for the picture of your axle tag. That is a 3k axle using #84 spindles so it corresponds with 3,500 lb axle parts. For replacement brakes you can use the # AKEBRK-35-SA. If you would rather stick with the Dexter branded brakes then you need the Dexter Nev-R-Adjust # 23-468-469 instead.
John A.
9/2/2026
installed these brakes on my dump trailer, all good!
Robin H.
9/3/2026
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Trailer Wiring Diagrams
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Brake Assemblies, Hubs, and Bearing Kit for a Dexter 3,500 EZ Lube Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Can Brakes Be Added To An Enclosed Trailer With A 3,500lb Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
Eric
9/2/2026
Excellent product, very reliable, works great , basically plug and play with no modifications, will get again when they finally wear out