Replacement Brakes for 2023 Tracker Marine Trailstar Boat Trailer
Updated 09/03/2026 | Published 08/27/2026 >
Question:
Hello, I have a 2023 tracker marine trailstar boat trailer that has surge brakes! vin TXXPGV175PTAB2 I use in fresh and salt water. i need recommendations on what brakes to install to cut down on the rusty sticking brakes Tandem axles THANKS FOR YOUR HELP
asked by: Craig W
Expert Reply:
Hey Craig! Assuming you're using drum brakes the Hydraulic Brake Kit # AKFBBRK-35-D with the Dacromet coating you were looking at would be the best option for your boat trailer. However, I do not have a way to identify your trailer using the VIN so I can't say for sure these will fit.
The # AKFBBRK-35-D is designed for 3,500 lb axles with a 4-bolt brake flange and fits 10" x 2-1/4" drums. If that is what you have these are a great replacement. If you have a different axle capacity or want a different brake style, I will need more information to help you find the right replacement.
Where do you typically take your boat?
Product Page this Question was Asked From
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 1" x 6' - 500 lbs - Qty 2
- Shop: Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 1" x 6' - 500 lbs - Qty 4
- Shop: Erickson Re-Tractable Ratchet Straps w Buttons - Bolt On - 2" x 5-1/2' - 1,333 lbs - Qty 2
- Shop: Erickson Re-Tractable Ratchet Straps w/ Push-Button Releases - 1" x 10' - 400 lbs - Qty 4
- Q&A: How To Determine If Boat Trailer has 10 Inch or 12 Inch Brake Assemblies
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Replacing Slipper Springs on Boat Trailer for 3,500 lb Axle
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Q&A: Looking For Hubs, Bearings And Brakes For 2004 2-Axle Extreme Boat Trailer
- Q&A: Strider Tire and TruRyde Hub/Drum Compatibility
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Wiring Diagrams
- Q&A: Looking for Replacement Bearings for 4,400 lb Axle of 2021 Grand Design Imagine 2800BH
- Q&A: Plug And Play Trailer Connector 4 Way Flat For 2026 Volkswagen Tiguan
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub



Dm
9/2/2026
I have a 2019 tracker targa with a dual axel trailer, and used these brakes. They worked great and the free backing was excellent. I use exclusively in the salt and they made it 2 and 1/2 years before the linings fell off the shoes and locked up a wheel. I just installed riveted pads for my current set to see if I can get more than 2.5 years. For what it's worth, the last 2 sets of brakes were also just bonded liners and only made it 2 years with my use. So these have been the best so far.