Replacement Hardware for 2016 Ram 2500 Firestone Air Bags

Question

Question:

I have a 2016 Ram 2500. I have the firestone air bags installed with daystar cradles. My right side daystar cradle has cracked 3 times. I suspect i have an alignment problem that I can’t get right. I want to eliminate the daystar cradles and use the firestone original mounts. I have the 2 large brackets that sit on the axle but I don’t have the bolts or straps that hold the lower bracket to the axle. I also need the 2 conical bolts that hold the air bag to the lower bracket. Can you help me get the right hardware kit?

asked by: Lonnie D

0

Expert Reply:

Hey Lonnie,

For your 2016 Ram 2500, the replacement parts for your Firestone Airbag kit will depend on the model of air bags that you have. I'd be happy to confirm which one you have, or you can determine based on the label on your kit.

Replacement Axle Strap for Firestone Ride-Rite Air Helper Springs - Qty 1 # F2135825808, Replacement 3/8"-16 Flange Lock Nut for Firestone Ride-Rite Air Helper Springs - Qty 1 # F2135823067, & Replacement Carriage Bolt for Firestone Ride-Rite Air Springs - Qty 1 # F2135823020 will work for the following Firestone air bag kits:

Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2598
Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs # F24XV
Firestone Ride-Rite Air Bags w/ Easy Mount Compressor and In-Cab Control - Single Path - 5,000 lbs # F57XV

Replacement Bracket Strap for Firestone Ride-Rite Red Lable Air Helper Springs - Qty 1 # F38ZR is only a confirmed fit for Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs - Rear Axle # F2706. This kit can also use Replacement 3/8"-16 Flange Lock Nut for Firestone Ride-Rite Air Helper Springs - Qty 1 # F2135823067, & Replacement Carriage Bolt for Firestone Ride-Rite Air Springs - Qty 1 # F2135823020 for the nut and bolt on the lower strap.

If you'd like to send me the label on your kit, I'd be happy to confirm which model you have and which parts will work for you! Just reply with a photo or the number on the label and I'll get you an answer!

expert reply by: Jerry B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Ryan, yes the Firestone Air Bag and Compressor kit part #F24XV that you referenced is a confirmed fit for your 2026 Ram 2500 Power Wagon. Are you planning on towing a heavier trailer?

view full answer...

Answer 8

Hey Robert congrats on the new truck! In bed hitch includes the puck system as well when it comes to fitment of the air bag kit brackets. For your 2026 Ram 3500 with the factory puck system, I recommend the Air Lift LoadLifter 7500 XL Air Helper…

view full answer...

Answer 9

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Answer 10

Hey Jim welcome back. To determine if you need the TorkLift Camper Anchor Relocation Kit item #TLA7004, you'll have to take a measurement. You'll want to measure from the front bumper of your Palomino HS2902 to the center of the rear anchor…

view full answer...

Answer 11

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 12

Hi Glen, It's good to hear from you again! If you're wanting to switch to the Roadmaster Comfort Ride system with the leaf spring, equalizer, and shock absorber upgrades, I recommend using the Roadmaster Comfort Ride Leaf Spring Suspension…

view full answer...

Replacement Hardware for 2016 Ram 2500 Firestone Air Bags

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching