Will the Caliber Vehicle Ramps Scrape the Front Bumper on a 2023 Lexus IS350 F Sport?
Updated 07/01/2026 | Published 06/24/2026 >
Question:
What is the angle of the incline? Looking to confirm if it will scrape the bumper skirt on a 2023 Lexus IS350 FSport.
asked by: KSL
Expert Reply:
Hello KSL,
Welcome to etrailer, I'm glad you found us!
Caliber doesn't list the angle of incline for the Vehicle Ramps # CA24AJ, but based on their published dimensions of 37-3/8 inches long with a lift height of 6-5/8 inches, the incline works out to be about 10 degrees.
I can't say for certain whether the front bumper skirt on your 2023 Lexus IS350 F Sport will clear the ramps, since that depends on the vehicle's front overhang and ground clearance. The # CA24AJ does have a gradual approach, though, making it a better option for lower-profile vehicles than ramps with a steeper incline.
The best way to check is to measure from the front tire contact patch to the lowest point of the bumper skirt, then compare that to the ramp angle and the available clearance as the car starts up the ramp.
Are you planning to use these ramps for routine maintenance like oil changes, or another project on your Lexus?
Product Page this Question was Asked From
Caliber Vehicle Ramps with Wheel Chocks - 20,000 lbs
- Car Ramps
- Service Ramps
- Lift Ramps
- 20000 lbs
- 13 Inch Wide
- 37 Inch Long
- Plastic
- Caliber
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Caliber Vehicle Ramps with Wheel Chocks - 20,000 lbs
- Q&A: Are the Legs Removable on the 68" Wide Thomas Payne RV Jackknife Sofa and Kickboard TP44AR?
- Q&A: How to Use Thule Leveling Ramps with Single Axle Dually Tires Safely
- Q&A: Can a Single Set of Vehicle Ramps CA24AJ Be Used on Dually Sprinter
- Q&A: Dimensions Of The Caliber Vehicle Ramps CA24AJ
- Q&A: How Much Lift Do The Caliber Vehicle Ramps with Wheel Chocks CA24AJ Provide?
- Q&A: Replacement Hub With 6 on 5-1/2 Bolt Pattern For Pace American Enclosed Trailer With 5,200 lb Axles
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Can Thule RV Wheel Levelers be Used with 7.5 inch Wide Tire
- Article: What Do I Need To Tow A Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Article: Rust Prevention
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Determining Trailer Tongue Weight



Rich S.
6/30/2026
If it’s to close put a 2 foot long 2x6 board in front of it that will add you another 2 inches of clearance it worked for me