What is Difference Between Yakima Ridgeback and Doubledown Bike Racks

Question

Question:

What is the difference between Yakima Ridgeback and Doubledown series bike racks? They seem similar in their features.

asked by: Vineet S

0

Expert Reply:

Hey Vineet, the Yakima DoubleDown and the DoubleDown Ace are no longer made but the Ridgeback part # Y02459 is very much a spiritual successor that has a few upgrades. Mainly being the frame cradles have added cushioning on them and instead of rubber straps that you would stretch around the bike frame this comes with zip straps that are easier to use for sure. Other than that most of the features are similar but a little more refined and easier to use on the Ridgeback. Do you have a Doubledown?

expert reply by: Jameson C

0

Ridgeback Straps
(click to enlarge)

Vineet S.

6/18/2026

No, I don't. I was planning on purchasing a Yakima and happened to find the DoubleDown at one of the online retailers at a much lower price. Not it makes sense, since it is discontinued.

Jameson C.

6/18/2026

@VineetS Makes sense! Yeah it was a pretty solid rack. There are many out there currently that are basically the same as it from other brands.

Answer 1

Since you are wanting a 5 bike rack there are only a few options that can carry that many bikes. Unfortunately, none of them will tilt with the bikes loaded. It is just too much weight and the rack could fail with that leverage on them. Of the 5-bike…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

What is Difference Between Yakima Ridgeback and Doubledown Bike Racks

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching