What is Weight Distribution System in Regards to Torklift Hitch Extender
Updated 06/18/2026 | Published 06/14/2026
Products Featured in This Question
Question:
Have a question about extender. Your part TLE1636 Currently have a 2026 Ford F-350 crew cab Platinum Plus with Tremor package. Trailer is an aluminum 16 v-nose enclosed trailer. Weights 2300 lbs. empty. With gear and side by side roughly 5800-6000 lbs. It says max weight with 7200 lbs with weight distribution. What does weight distribution consist of? Thanks
asked by: Steve J
Expert Reply:
Hey Steve, so a weight distribution system is a component that installs between the truck's hitch and the front of the trailer frame that offers additional support right at that connection point between the two. It's kind of hard to describe in a simple way but it basically moves some of the trailer tongue weight up to the front axle of the tow vehicle.
So the issue I can foresee with your setup is that most aluminum trailer manufacturers do not allow you to use weight distribution with them as they put additional stress on the softer metal. So I would recommend checking with your trailer manufacturer to see if they would be okay with it or not as you would need it to be able to use the part # TLE1636.
To see an example of a weight distribution system check out the Equal-i-zer part # EQ37100ET.
Do you need an extender because you have a truck bed camper?
Product Page this Question was Asked From
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 36" Long
- Hitch Adapters
- Hitch Extender
- Trailers
- 36 Inch Extension
- Fits 3 Inch Hitch
- 3600 lbs
- TorkLift
more information >
Continue Researching
- Article: How to Mount a Truck Bed Camper
- Q&A: Is There A Hitch Extender For 2.5" Hitch With A 7,500lb GTW Capacity
- Q&A: Will the Set Screws Sit Flush on the 3" Gen-Y Anti-Rattle Reducer Sleeve?
- Q&A: Recommended Swing Away Bike Rack for a 2024 Ford Bronco
- Q&A: Hitch Extender for 2020 Ford F-450 with Camper that Extends Past Truck 36 inches
- Q&A: What is the Tongue Weight for the TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch
- Q&A: Recommended Hitch Extender for Towing/Hitch Accessories With Truck Bed Camper
- Q&A: Extension for 2024 Ford F-450 With Truck Camper Towing Boat Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Stability Control for Heavy Duty Vehicles
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: What Is a Supplemental Braking System?
- Article: Blue Ox Vehicle-Specific Base Plates
Jeff
6/18/2026
Good morning Steve. I have not pulled anything with the hitch at this point I’m using it mainly for a support for my rear step on my camper. I will say it’s very well made and I appreciate having it on my set up. Thank you, Jeff.