Looking for Bearings for 2020 Forrest River Wildwood 260 RTX Toy Hauler

Updated 06/15/2026 | Published 06/09/2026

Question:

I want to purchase a new wheel bearing and seal kit, but Im not sure which kit I need. I own a 2020 Forrest River Wildwood 260 RTX Toy Hauler. Can you point me in the right direction?

asked by: Mike S

Expert Reply:

I am sure we have what you are looking for but is there anyway you could get me the axle capacity of your trailer? I tried to see if we had that info already but wasn't able to verify it.

EDIT: Since you have 3,500 lb axles the correct bearing kit would be the part # BK2-100.

expert reply by: Jameson C

Mike S.

6/10/2026

The axle capacity is 3500.

Jameson C.

6/10/2026

@MikeS thanks! Based on that the correct bearing kit would be the part # BK2-100 which comes with the correct bearings and seal.

Craig A.

6/11/2026

You indicate you have a 2020 RV Toy Hauler. I am assuming that this is an RV and not a utility trailer. Therefore you should have heavier axle ratings than the 3500#. I would assume you have at least a 7000# axle rating.

Jameson C.

6/11/2026

@CraigA Yeah probably 7k total axle capacity via two 3.5k axles.

John

6/12/2026

I have a Dexter trailer with a 3500 lb axle with a #84 spindle. I used a BK2-100 bearing kit. But the inner bearing race did not fit. I ordered a L68110 bearing race. The kit bearing seal was too big. I ordered a 010-180-00 grease seal. This seal was correct for my axle spindle repair. Will was my contact at etrailer. Hope this info helps.