Recommended Duracap Quest Truck Topper for a 2004 Ford F-150 w/a 6-1/2" Bed and the Newer Body Style

Question

Question:

Can you customize the size of this cap? The bed size that is listed for my truck is different than the actual size, My truck is a 2004 F150 FX4 Super Cab which is a 6 1/2 ft not 5 1/2 ft.

asked by: Dana S

0

Expert Reply:

Hey Dana. I checked with the manufacturer and found an option that fits the 2004 Ford F-150 with a 6-1/2' bed so long as yours is not the rounded body Heritage style like the bottom truck in the picture below.

If your 2004 F-150 FX4 Super Cab with a 6-1/2' bed looks like the top picture below, you'll want the Duracap Quest Truck Topper - Aluminum item # DUC45ZR. This hard aluminum topper comes with built in locks and mounts directly to the stake pockets without drilling.

Which body style does your F-150 have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

2004 F-150 Body Styles
(click to enlarge)

Duracap
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

Hey Chris, No, there isn't an upgrade kit for your Generation 1 MORryde StepAbove RV Steps to make them a Generation 2. There is a Replacement Leg for MORryde StepAbove RV Steps - 2nd Generation #MR36DR, but because the Generation 1 steps'…

view full answer...

Answer 9

Hey Tyler, thanks for reaching out! Yes, the Fas-Top Traveler Roll-up Tonneau & Soft Truck Topper Combo #FT38RV is confirmed to fit the standard bed on your 2020 Chevy Silverado 3500. Do you plan on mainly using it as a tonneau cover or as the…

view full answer...

Recommended Duracap Quest Truck Topper for a 2004 Ford F-150 w/a 6-1/2" Bed and the Newer Body Style

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching