Recommended 2" Coupler for a 2" Wide Trailer Tongue

Updated 05/29/2026 | Published 05/25/2026

Products Featured in This Question

Demco Straight Tongue Trailer Coupler - eZ-Latch - Silver - 2" Ball - Bolt On - 10,000 lbs

(293)

$77.91

Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs

(910)

$39.65

Question:

Im looking for a auto hitch for 2inch ball that fits 2inch tongue

asked by: Gary C

Expert Reply:

Welcome back Gary. To replace a 2" coupler that fits a 2" wide trailer tongue our options are limited to the Channel Tongue Trailer Coupler item # CT-3001-Z. It's got the standard trigger latch. There's not many options for couplers designed for 2" wide trailer tongues.

What you could do to install the Demco Straight Tongue Trailer Coupler item # DM15000-52, you were looking at, is get two 1/2" thick pieces of steel and weld them onto or bolt through them on the sides of your trailer's tongue.

The Demco coupler with the auto latch item # DM15000-52 is only available for trailer tongues that are 3" wide so you'll need to make some modifications to your tongue to make it fit. It fits a 2" hitch ball.

What kind of trailer do you have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

DM15000-52
(click to enlarge)

CT-3001-Z
(click to enlarge)

Gary C.

5/29/2026

It's custom set up. I move my trailers around with fork lift and ball. Sometimes regular hitch jumps off ball. Thinking auto hitch would latch easier without getting off the lift. Thanks Gary