Replacment L-Pin and Spring clip for Fastway E2 Weight Distribution Hitch

Updated 05/28/2026 | Published 05/14/2026

Products Featured in This Question

Fastway e2 Weight Distribution w/ Sway Control - No Shank - Round - 10,000 lbs GTW. 1,000 lbs TW

(22)

$510.00

Replacement L-Pin for Fastway e2 Weight Distribution Systems

(446)

$14.30

Replacement L-Pin Clip for Fastway e2 Weight Distribution Systems

(104)

$13.56

Question:

I need to replace the pin and spring that holds the pin to lock the bars into place. Would you be able to help with that.

asked by: Andre E

Expert Reply:

Definitely can help Andre, thanks for reaching out!

The replacement parts for Fastway e2 system # FA94-00-1033 are:

Fastway e2 Weight distribution systems replacement L-pin # FA92-03-9205 secures the spring bar to the L-bracket on 6K to 12K systems.

Fastway e2 Weight distribution systems replacement spring retaining clip # FA92-04-9208 locks the L-pin in place on 6K to 12K systems.

What do you usually tow with this setup; camper, cargo, or boat?

expert reply by: James D

Andre E.

5/15/2026

Thank you for your reply. But I need the pin and spring at the other end of the j-bar, at the hitch end. The pin sits in the groove at the shorter end of the J. It has worn out and the j-bar is falling out while I am driving. I have rigged the setup with a bolt but would like to replace with the proper parts asap. I would post a picture but am not sure how to.

James D.

5/15/2026

@AndreE No worries and my apologies. Looking at the visual from the install guide, these are the parts that connect the trunnion bar at the head of the System. I attached the install guide as well. Fastway e2 Weight Distribution System: Replacement Lock Washer # FA92-04-9615 Replacement Keeper Bolt # FA92-04-9620 Replacement Nut # FA92-04-9216

Helpful Links

https://www.fastwaytrailer.com/wp-content/uploads/2024/08/fw-e2-trunnion-manual-6x9-2022.pdf

Andre

5/25/2026

I have a different anti sway bar system. Fastway e2 Weight Distribution w/ Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW I need the pin that is held by the metal sheet. It has worn out. It’s the part that stops the round J or L bar from falling off the hitch. It’s the small pin and it has worn down to the point where it does not hold the bar in place anymore.

James D.

5/27/2026

@Andre I believe your describing the Fastway Sway Control Bracket Hardware Kit # FA92-02-9200. Let me know if this is correct.