Best Weight Distribution Hitch For 2025 Chevy Blazer Hauling Forest River R-Pod RP-190

Question

Question:

Hello! Trying to find out what WDH I need. Tow vehicle is 2025 Chevy Blazer and trailer is Forest River R-Pod RP-190. Some say I need one, others say I don't. Thanks, Bob

asked by: Bob L

0

Expert Reply:

Hey Bob, thanks for reaching out. Yes, I do think that setup will benefit from a weight distribution hitch. The camper isn't super heavy, but the Blazer could undoubtedly use some help handling it and a WD hitch will really help level things out. That will in turn improve stability and braking and make those trips a lot more comfortable. For your Forest River R-Pod RP-190 I recommend the following:

- Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW # C95MJ

This is a good solid cost effective WD hitch that helps with sway control and weight distribution. It's rated for campers with tongue weight between 500 and 800 lbs so your R-Pod will be right in that sweet spot to where you'll see noticeable results. It'll make the biggest difference on those highway stretches or areas with strong crosswinds or uneven roads.

The main thing you will want to check is the space on the trailer tongue. The spring bar brackets must be placed about 31" back from the center of the hitch ball. You'll want to measure out your tongue and make sure there are no obstructions in this area like gas tanks or batteries. As long as you have room for the brackets, you will be good to go.

Any trips planned for the R-Pod once you get the WDH set up?

expert reply by: Jesse M

0

Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW
(click to enlarge)

Chad

4/23/2026

I just purchased a distribution hitch for my Grand Cherokee / Rpod 179 combination...it made a big difference. Feels a lot more controlled and safer for highway driving. I highly recommend it.

Jesse M.

4/23/2026

@Chad Nice! Glad to hear the WD hitch is working out and making your trips safer. That's what it's all about! Thanks for sharing!

Answer 1

Hey Steve, thanks for reaching out. We do have a good option for that. I recommend the following: - Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW #C95MJ It’s designed for lighter trailers with 500–800…

view full answer...

Answer 2

Hi Mike; we don't have a way to swap out the 2" ball on the Andersen Weight Distribution Hitch #AN88VR. We do have the 2-5/16" ball separately, #AN45VR, but we don't have it as a complete system. If you really want the Andersen,…

view full answer...

Answer 3

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 4

Hey John, the weight of the Andersen weight distribution #AM3350 is 53 lbs and the Blue Ox #BXW1000 weighs 95 lbs. Worth mentioning is that the Blue Ox is going to do a much better job of actually redistributing the tongue weight to the tow vehicle…

view full answer...

Answer 5

Hey Bob, thanks for reaching out. Yes, the Rich Solar BRAVO PRO 30 MPPT Solar Charge Controller #RS25FR does include mounting screws and there are mounting holes on the unit itself. The front surface panel comes off allowing access to the four screw…

view full answer...

Answer 6

Generally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or…

view full answer...

Answer 7

The king pin dimensions can be the same between fifth wheel trailers and large commercial trailers. Both types of trailers often use a standard 2 inch king pin although semis sometimes have a 3-1/2 inch. As long as your truck fits a 2 inch king pin…

view full answer...

Answer 8

Hey Matthew, it sounds like you are looking for the SmartPlug Adapter part #SM43VR that you referenced which goes from a 50 amp Smartplug socket to a 30 amp male twist lock. Would this work or are you looking for something different?

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I spoke to my contact at Valterra and found that the #A10-5030FBK steps down a 50 amp service receptacle (2 X 120VAC) to 30 amps supply. This would work great for your camping trailers electrical system. I have linked the above mentioned product to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Best Weight Distribution Hitch For 2025 Chevy Blazer Hauling Forest River R-Pod RP-190

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching