Can Lippert Center Point Replace MORryde CRE3000
Updated 04/16/2026 | Published 04/08/2026 >
Question:
I currently have the moride case 3000. Can I bolt up the lippert center point Air ride to the same center hanger?
asked by: Gary
Expert Reply:
Hey Gary! The CRE3000 doesn't fit a specific hanger size so you're going to need to measure. The Lippert Center Point # LC1565391 requires a minimum hanger height of 2-1/2" and a minimum hanger width of 3". You also need 29-1/2" or 30-1/2" hanger spacing. If you meet these requirements then the Lippert Center Point can be installed on your trailer.
What kind of trailer are you towing?

Brad S.
4/15/2026
I mounted my kit to the same mount that was in the picture, I believe I had the clear a little area on the angle that was welded in between but it was not much to make the clearance for the pivot. everything else was a bolt up for this kit and it works great, smooths out the trailer so much, We drove from Utah to Minnesota with water in the dog dish and it did not spill a drop of water so it really does work. I set mine at 50 PSI as we are using it on a 36 ft Grand design Momentum Toy Hauler. This kit answered all my issues and would do it again if I changed trailers but we like ours. Thanks

David
4/16/2026
Best money I've spent on our 5thwheel rides extremely smoothly I did plumb up each side individually and run a different pressure on each side due to my 5thwheel being Heavier on one side
Product Page this Question was Asked From
Lippert Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Tandem Axle
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: MORryde X-Factor Crossmember for 2024 Grand Design Reflection 150 Series 295RL
- Shop: MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: MORryde X-Factor Crossmember Set Up - 2025 Grand Design Reflection Fifth Wheel
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Lippert Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle
- Shop: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers
- Shop: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications
- Shop: MORryde X-Brace 5th Wheel Landing Gear Stabilizer
- Article: Trailer Wiring Diagrams
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Video: In-Depth Look at the B&W 5th Wheel to Gooseneck Pin Box
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Wiring
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: Will MORryde X-Factor Be Beneficial On Front/Rear Hangers With Lippert Center Point
- Search Results: trailer jack
- Shop: Suspension Enhancement
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Gooseneck Hitch
- Search Results: trailer leaf springs
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Search Results: trailer brakes
- Shop: Fifth Wheel Hitch
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T



Charles H.
4/15/2026
Well I don’t know what kind of trailer you have but mine is a 2022 Jayco Eagle I had the cre3000 suspension on it from the factory and the lippert center point bolted right on no problem and you will love the way the trailer rides after installing it. Hope that helps and hopefully you can put it on your trailer.