bing tracking image
Q & A Icon

Trailer Hitch and Weight Distribution Hitch for Towing With 2023 Toyota Sienna  

Updated 08/20/2026 | Published 04/04/2026

Question:

Hello, I have a 2023 sienna with the factory tow package. I would like to upgrade my trailer but am concerned about tongue weight. It is rated for 3500/350, and I am planning to tow around 2300lb, but most of the trailers that Im finding have the axle pretty far back. Im looking at PNs FA92-00-0450 and C22UR the factory hitch is 1 1/4. Do you have feedback on that?

0

Expert Reply:

Hey Rob! That will make for a really nice setup with your 2023 Sienna. Even though that isn't a super heavy trailer you're pushing the limits of the Sienna. Tongue weight is typically 10-15% of the loaded trailer weight, plus you have anything behind the rear axle, and I'm sure you've got cargo you're taking with you in addition to the trailer.

Adding the Curt # C22UR will allow you to use the Fastway e2 # FA92-00-0450 and bumps the hitch capacity up as well (you're still limited by the lowest rating, probably the Sienna itself). This is going to keep you level which is a big deal in a van that already sits fairly low. It will also cut down on sway for a much improved towing experience. You will also need a hitch ball # 40038 and # ALL643216 for hitch ball installation.

Are you getting a trailer with brakes? If you are, you will also need a brake controller like the Redarc Tow-Pro Liberty # RED52VR. The Liberty is simple, reliable, and doesn't take up space in the cab. The main unit is hidden so only the control knob is visible which also gives it an OEM look.

What are you towing now? Any big trips coming up once you get the new trailer?

expert reply by:
0
Robin H
Redarc Tow-Pro Liberty
Redarc Tow-Pro Liberty
(click to enlarge)
Gary profile picture

Gary

8/20/2026

I have a Kia Sorento rated to pull 5,000 lb. I pull a 20-ft camper trailer with a 3500 gvwr. The Hitch completely prevents the back of the vehicle from sagging. It also greatly reduces the sway you get if you make quick Lane changes or in the wind. My only complaint is the ground clearance. The pins that hold the anti-sway bars on on the trailer actually hit. I put a small piece of PVC pipe on each pin which help hold it up and eliminated that problem. The hitch itself occasionally hits. This turns out to be a bigger problem when the trailer was not attached and I backed up faster on a steep driveway triggering my collision alert. I advise removing the hitch when the trailer is not attached. I am very pleased with the hitch and would gladly recommend it to anyone.

Robin H. profile picture
Etrailer Expert

Robin H.

8/20/2026

@Gary thanks for sharing your experience with the Fastway! That is great feedback and I'm glad to hear it's working as expected. Ground clearance can definitely be something to watch on a lower vehicle, or when going through steep driveway transitions. Removing the shank and hitch head when you aren't towing is a good practice and also keeps it from interfering with parking sensors or becoming a shin catcher.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>