Do You Have a Bearing Buddy Bra w/a 2-1/8" Diameter?

Question

Question:

Do you have a bearing hub similar to the bearing buddy bra with a 2-1/8 id?

asked by: Harry E

0

Expert Reply:

Hey Harry, welcome back! The Replacement Bearing Buddy Bras item # BB19B are what you'll need for a Bearing Buddy with a 2-1/8" outer diameter. This bra fits about a half dozen Bearing Buddy Protectors.

The closest Bearing Buddy Bearing Protectors we have to a 2-1/8"(2.125") inner diameter measurement are listed below:

2.047" item # BB2047SS
2.080" item # BB2080SS
2.240" item # BB2240SS

I recommend checking your hub bore with a digital caliper like item # PTW80157 to verify your exact measurement. Do you have a part number off of one of your hubs? I could also look it up that way.

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

BB19B
(click to enlarge)

Jerred H.

3/4/2026

Hey Harry, did you get a chance to check your hub bore with a digital caliper to confirm the right Bearing Buddy size? Once you have that measurement, I can help narrow down which protector will fit best. Let me know what you find.

Answer 1

If the outer diameter of your Bearing Buddy measures 2.125" then you need the Model 19B Replacement Bearing Buddy Bras #BB19B. These are compatible with models that have an outer diameter of 2-1/8" (or 2.125" in decimal form). Attached…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 4

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 5

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 6

Hey Les, welcome back. The Lippert Hydraulic Hose item #LC52AX does not include any fittings. This is a 1/4" inner diameter, 1/2" outer diameter orange hydraulic hose rated for high pressure systems up to 3,000 psi. The hose is sold by the…

view full answer...

Answer 7

Hey Aaron, Unfortunately that master cylinder from Attwood is no longer made and cannot be replaced. For that you would need to replace the whole actuator. The closest replacement we carry for that is going to be the Demco #DM72VR brake actuator.…

view full answer...

Answer 8

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Answer 9

Super cab has a full size door and smaller rear opening door behind whereas the SuperCrew cab has 4 full size doors. I attached a picture that shows the two different styles. The part #25-0800 is designed to fit the crew cab models.

view full answer...

Answer 10

Hey Tyler, thanks for reaching out. I'm sorry to say no, we don't have a 5 on 4-1/2" hub, or any hub for that matter that fits a 3/4" straight spindle. That kind of spindle was really only seen on older trailers and is basically…

view full answer...

Answer 11

Hey it sounds like you are on the right track here, Blake. The Kodiak Disc Brake Caliper #KDBC225DAC is exactly what we recommend for replacing the Tie Down 46304 calipers. We have confirmed on multiple occasions that the Kodiak caliper is a suitable…

view full answer...

Answer 12

Most likely the correct replacement bearing buddy bra that you would need is the part #BB19B which has an outer diameter of 2-1/8 inches. Part #BB17B has an outer diameter of 2 inches, and part #BB23B has an outer diameter of 2.441 inches (this would…

view full answer...

Do You Have a Bearing Buddy Bra w/a 2-1/8" Diameter?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching