Will Roadmaster Comfort Ride System # RM-2460-2560 Fit 2021 Grand Design Imagine 22R
Updated 02/10/2026 | Published 01/21/2026
Question:
I own a 2021 Grand Design Imagine 22R. Dual 3 Axles 3500 lbs. GVRW 7000 lbs. Axles are 35 apart and hangers are 61. The existing leaf springs have a 2200 lbs each capacity. Will a Roadmaster Comfort ride 2560 work or is it an overkill?
asked by: Timothy O
Expert Reply:
Hey Timothy, thanks for all of the info you listed from your 2021 Grand Design Imagine 22R. From knowing all of that yes the Roadmaster Comfort Ride system part # RM-2460-2560 would fit and work great.
This is designed for 3 inch diameter axles like you have and would be just a little rated over what you have now so the ride quality would not be harsh. Right now you leaf spring capacity per axle of 4,400 lbs and with this kit it would be 5k so it wouldn't be a drastic amount and the shocks will make a huge difference making it feel a lot softer.
Product Page this Question was Asked From
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 5.2K Axles
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Leaf Spring Replacement System
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- Tandem Axle
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: morryde xfactor
- Search Results: trailer leaf springs
- Search Results: alltrek 4000
- Search Results: 4400 lbs trailer leaf springs
- Q&A: Recommended 25-1/4" Leaf Springs w/ 4 Leafs for a 5,000 lbs Axle
- Q&A: Replacement Leaf Springs and MORryde X-Factor Crossmember for 2021 Grand Design Imagine 2400BH
- Search Results: roadmaster comfort ride
- Search Results: lippert equalizer
- Search Results: lippert road armor
- Q&A: Roadmaster Comfort Ride and MORryde X-Factor for 2025 Forest River Impression 238RLVIEW
- Q&A: Trailer Leaf Springs Rated Slightly Higher Than 4,400 lb Axle
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Video: MORryde Tandem Axle Trailers AllTrek 4000 Equalizers Review
- Video: What to Know About the 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Q&A: Is It Worth Upgrading to MORryde AllTrek 4000 From CRE3000 on Jayco 5th Wheel Trailer
- Shop: etrailer Rust-Resistant 5-Leaf Double Eye Spring for 6K Trailer Axles - 25-1/4" Long - Dacromet
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 25-1/4" Long
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Review of Power Mountain Automotive Tools - Jacks and Jack Stands - PM34FR
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
on Trailer Suspension Parts
Jameson C.
2/10/2026
Hey Timothy, how did the Roadmaster Comfort Ride setup work out on your Grand Design Imagine 22R? It sounds like the shocks should have made a noticeable difference in ride quality. Your update could make it easier for others looking at the same upgrade.