White Cover for Ventline E-Z Lift Ventadome Roof Vent

Question

Question:

Im having difficulty finding a white cover for Ventline E-Z Lift Ventadome Trailer Roof Vent. I see it does have mounting tabs for easy installation, if I find the correct cover. Thank you

asked by: Larry A

0

Expert Reply:

Hey Larry! We don't have any covers available designed for the Ventline mounting points. However, you can still use other covers with your vent since they're all designed to fit a standard 14" x 14" trailer vent.

I recommend using the MaxxAir II # MA76JR or MaxxAir FanMate # MA00-955001. Both come with hardware to use their EZClip pins so you can easily open and remove the cover when needed. More than likely you won't be able to get your lid all the way open with the cover on (this is true for pretty much any cover) but you will have max airflow as long as it opens 50%.

expert reply by: Robin H

0

MaxxAir FanMate
(click to enlarge)

Robin H.

12/29/2025

Hey Larry, how did the MaxxAir FanMate cover work out with your Ventline vent? Did the airflow and lid clearance end up meeting your needs? Your update could make it easier for the next person with the same setup.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 7

Hey Craig, thanks for reaching out. Yes, they will! The TorkLift StableLoad Suspension Upgrade #TLA7200 will indeed work with the Timbren bump stops on your 2025 Chevy 3500HD. The StableLoads mount under the overload spring, while the bump stops…

view full answer...

Answer 8

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 9

Hey Michael congrats on the new truck! The social media group is 100% correct. Adding a sway bar to the rear of your 2026 Ford F-250 is definitely going to help with sway. However, I've got a better option since you're getting sway going slow…

view full answer...

Answer 10

Hi David, that’s a really good question and I’m glad you’re looking at the bigger picture here, because this is exactly where people start thinking about long term stress and not just whether something will fit. Before I get into that, The Gen-Y…

view full answer...

Answer 11

Hey Mike, welcome back! Both the Firestone Ride-Rite #F2613 rated for 5,000 lbs, and the Firestone Ride-Rite Red Label #F2709 rated for 7,500 lbs will keep you at factory ride height when you aren't towing. All you need to do is run the air bags…

view full answer...

Answer 12

It sure is Adam. Your 2024 Brinkley Model G3950 comes with three 7,000 lbs Dexter heavy-duty axles. The Dexter Bearing Kit item #DX58ER is the correct one. This kit is sold per hub and includes new bearings, races, a seal, a tang washer, and a cotter…

view full answer...

White Cover for Ventline E-Z Lift Ventadome Roof Vent

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching