Which Spidy Gear Bed Webb Net for 2023 GMC Sierra Short Bed

Question

Question:

2023 Silverado ZR2 with short bed. What web size would be best ?

asked by: Hunter

0

Expert Reply:

Hey Hunter, for the short bed of your 2023 Chevy Silverado ZR2 you would want the # 80112-01 which is unstretched at 60 inch by 48 inch.

expert reply by: Jameson C

0

Jameson C.

12/29/2025

Hey Hunter, how did the 60-by-48 Spidy Gear cargo net work out on your Silverado’s short bed? Your feedback could help others figure out the right size for their trucks too.

Reply

Answer 1

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 2

Hello Kate F, I too am a Kate F =) Yes, the Valterra #SS01 Sewer Solution can definitely work off-grid, but there are a few things to keep in mind to make sure it works well in your setup. The great thing about this system is that it doesn’t need…

view full answer...

Answer 3

Hi Bill; the Power Mountain Tallboy Off-Road Bottle Jack #PM94FR weighs 13.9 lbs. This has a lift range of 11-5/16" tall to 27-1/16" tall and a weight capacity of 24,000 lbs. What do you plan on using the jack for?

view full answer...

Answer 4

I would be happy to recommend a replacement waste valve for you, but unfortunately we do not have a break down of which style waste valve is used on a specific RV. A few of the different styles are a single 3" waste valve like the Valterra Waste…

view full answer...

Answer 5

The bayonet part of the Flo-Jet macerator is going to connect to your 3" black tank waste valve as the input and use a 3/4" garden hose connection as the output so you wouldn't need the EZ Coupler 4-in-1 Threaded RV Sewer Adapter…

view full answer...

Answer 6

So the difference is purely in how the two connect to your sewer pipe, which will also tell you which one you need; one will slide into the pipe (the spigot) while the other will slide onto the pipe (the hub): - Slide Into Pipe: Valterra Waste Valve…

view full answer...

Answer 7

We do offer the 9" snap pads like SnapPad Jack Pads part #SP54FR6. Depending on whether you have a 5th wheel or a motorhome there is a slight difference between them but I would be happy to help you select the correct ones if you provide that…

view full answer...

Answer 8

The double valve you need to install on the 3-inch waste pipe in the photo is part #T84. This is the female valve designed to fit over a 3-inch pipe. To cap the 3-inch line you would need part #T50B. This is a waste valve that comes with a 3-inch…

view full answer...

Answer 9

I have a solution for you, but there isn't an adapter available that would allow you to connect your 4 inch sewer hose to the smaller macerator hose to create an extension. The macerator hose ends aren't threaded; they are held in place with…

view full answer...

Answer 10

The RhinoFLEX RV Sewer Hose Extension with Swivel Lug and Bayonet Fittings #CAM39765 and similar items do have removable orange fittings but there are not replacement parts available. If you have the fittings then you just need the hose #CAM39671. If…

view full answer...

Answer 11

While there isn't an adapter to go directly between the Valterra Waste Valve for RV Black Water Tank part #T50A can be added on in place of your current 3" lug cap in place now. Simply cut it off and attach this one using the LaSalle Bristol…

view full answer...

Answer 12

Hello Keith, I am happy to hear that you have a warm place to do the work, I am not sure where you are located but here in Missouri it's pretty cold today! Valterra waste valves aren’t directional, meaning they can handle waste flow in either…

view full answer...

Which Spidy Gear Bed Webb Net for 2023 GMC Sierra Short Bed

Product Page this Question was Asked From

Continue Researching