How Thick is Plastic Guide of etrailer E Track Wheel Tie-Down Straps with Roller Idler and Ratchet
Published 12/04/2025
Question:
Could you please give me the thickness of the black blocks that engage the tire treads? Ill be using them on a Honda Goldwing reverse trike conversion and dont have a lot of room to snake the straps between the tire and fiberglass fender. Photo from a recent pothole event that knocked the crappy fender mount loose shifting it into the tire smoking it
asked by: Richard J
(click to enlarge)
(click to enlarge)
Expert Reply:
Hey Richard, the black plastic guide blocks for the etrailer E Track Wheel Tie-Down Straps with Roller Idler and Ratchet # e62NR that you referenced are going to be right at an inch tall including the little ridges on top of the block. Just looking at your pictures I believe you would have enough clearance but you would want to measure to be sure. Must have been a pretty big pothole to knock the fender mount loose!
Product Page this Question was Asked From
etrailer E Track Wheel Tie-Down Straps with Roller Idler and Ratchet - 2" x 12' - 1,333 lbs
- E Track
- E Track Straps
- 2 Inch Wide
- 1333 lbs
- 12 Feet Long
- etrailer
more information >
Continue Researching
- Search Results: e track
- Search Results: etrack wheel chock
- Shop: Caliber EdgeGlide XL Transition Plates for Enclosed Trailers - 72" Long -
- Search Results: carr trailer steps
- Search Results: trailer stairs
- Search Results: trailer steps
- Search Results: steel trailer steps
- Search Results: transition plates trailer door parts
- Shop: Enclosed Trailer Transition Plate - 81-3/4" Long - Steel - Qty 1
- Q&A: Adding a Battery on an Enclosed Trailer to Power Interior Lights
- Video: Ultimate Overview of the Erickson E-Chock Wheel Chock for E Track
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Video: A Closer Look at the M-3 Enclosed Trailer Transition Plate
- Video: Review of Caliber Trailer Door Parts - Transition Plates - CA97EJ
- Q&A: Recommended E-Tracks and Straps for Towing a 4,000 lbs Car
- Shop: etrailer Enclosed Trailer Transition Plate - Universal - 1,000 lbs - Qty 2
- Shop: etrailer E Track Wheel Tie-Down Straps with Roller Idler and Ratchet - 2" x 12' - 1,333 lbs
- Shop: Erickson E Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Shop: Pack'Em Wheel Tie-Down Kit for Truck Beds and Trailers - 30" Tires - 800 lbs
- Video: All You Need to Know About the 3" Wide Continuous Hinge
- Video: etrailer Enclosed Trailer Transition Plate Installation
- Video: Review of Bright Way Trailer Breakaway Kit - Kit with Charger - 3802308
- Q&A: How to Power Trailer Dome Light When Not Connected to Tow Vehicle
- Video: Let’s Check Out the Brophy D-Ring Tie Down Anchor
- Q&A: Are There Long-Term Service Contracts To Use PingMaster Trailer Tracking Devices?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: What Surge Brake Actuator do I Need for My A-60 with Drum Brakes in Fulton Fold Away Tongue?
- Q&A: Dimensions and Warranty of the Pro Series Square Jack # PS1400950376
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
on ATV-UTV Tie Downs
Richard J.
12/4/2025
I'll never get those between my fender and tire so I'm left with two options, cut them off or pull the fenders to haul. Tomorrow I'll see if I can snake just a strap over the tire and if so, I'll go with option one. Pothole wasnt that big. This thing has a long history of fender bracket breakage and shifting due to design problems and sloppy robotic welds. That reflector you see is factory installed using gorilla tape so you get the idea! I just bought a used Aluma MC 210 and need to find out what bearings races and seals (and anything else) I need to make sure its tip top. I think everything in my cart is compatible so I'll add bags, etc, and hit the buy button Friday or first of the week. Thanks for the help.