Best Adapter for Furrion Camera Kit to Work with 2024 GMC Sierra 7-Way

Question

Question:

I bought a filter for my backup canera from you VGR64VR. I just installed it, wires marked power to the feed wires and it didn’t seem to fix my problem of the camera losing it signal. The camera doesn’t cut our/lose signal as much as before, but it still cuts out. I have a 2024 GMC and the camera is a furring camera. Is there another filter or id this the best it’s going to get?

asked by: Mike B

0

Expert Reply:

Hey Mike!

My go-to fix for a Furrion camera system and a GM truck is the 7-Way Vehicle Power Adapter # FR87PR. Furrion came out with this for the exact reason that you're talking about, and it's been a solid solution as well.

Where did you end up installing the Voyager PWM Filter?

expert reply by: Jon G

0

Mike B.

10/24/2025

At the connection of the camera. My trailer came wired from the factory for the camera, I just had to buy it. Up till I bought this truck, it works fine with my 2013 GMC

Jon G.

10/24/2025

@MikeB Just curious! Yeah, there's problems all over the place with never trucks and their wiring. The manufacturers have some great ideas with making some nice features for these trucks, but we're seeing that they haven't put a ton of thought into aftermarket products and how those will be affected.

Mike B.

10/24/2025

So I’ll need to buy this other piece but before I do I also have 2 other questions. 1) Do I need to remove the filter I put in for this new piece to work? 2) I’m not sure it possible, but can I return the filter I bought from your company? I been in the automotive field as a tech for over 45 yrs and know sometimes you can’t return electrical parts after they’ve been installed.

Jon G.

10/24/2025

@MikeB I'm not sure if they will work together, so I recommend keeping the filter in place and then using the Furrion adapter together first. Since the filter was installed we unfortunately won't be able to take it back, which is why I recommend trying them together first. Worst case is they don't work together and then you take the filter off.

See All (5) Replies to Mike B. ∨

Answer 1

Typically people install two of the CE Smith Post-Style Guide-Ons #CE27670 on their pontoon boat trailer but it is really up to you. You can install as many or as few as you would like. Two sets would give you a really good idea where you need to be…

view full answer...

Answer 2

Yes, you can! You will only need to install one of the 12V PWM Filters item #VGR64VR if you do it upstream before the circuit branches off to the separate cameras. You do not need one at each camera.

view full answer...

Answer 3

Furrion Vision S RV Camera Systems like the #FOS43TASF have a 492' range so the length of your trailer isn't to blame here. Most likely the unit is getting enough power to turn on and sometimes pair and then loses the signal as the voltage…

view full answer...

Answer 4

Hey there Martin! Yep, if you're using a Furrion RV Observation Camera with your 2025 Chevy Silverado 2500 HD Custom 4x4, you'll likely need the Furrion 7-Way Vehicle Power Adapter with Power Switch part #FR87PR. Newer Chevy and GMC trucks…

view full answer...

Answer 5

Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…

view full answer...

Answer 6

For the newer GM trucks like your 2024 Chevy Silverado 2500 you do need to use the Furrion GM adapter part #FR87PR with the Furrion Observation Vision S systems like the part #FOS43TASF that you referenced. This is the adapter that the video you…

view full answer...

Answer 7

Hey Mary! The 12V PWM Filter #VGR64VR will work with the Furrion camera and prevent any issues with the PWM from your 2020 Sierra. However, I do recommend getting the Furrion Vision S+ #FR57AD over the old Vision S. They use the same mount so this is…

view full answer...

Answer 8

We definitely know about the issue you are referring to. We have just the part for you! Furrion recently came out with a brand new adapter for your 2022 GMC Sierra 1500 Limited to work with your camera system. The part you need is the 7-Way Vehicle…

view full answer...

Answer 9

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 10

The biggest issue we see with the Furrion Vision S Wireless RV Backup Camera Systems like part #FOS43TASF comes from the wiring on the vehicle side, the running light circuit in particular. If it's less than 12 volts then the camera won't be…

view full answer...

Answer 11

Thanks for reaching out, i have a couple things for you to do. Let me explain below: *12V PWM Filter for RV Backup Camera Systems - Hardwire #VGR64VR. The newer GMC vehicles use PWM(Pulse With Modulation) in their electrical systems. The Furrion…

view full answer...

Best Adapter for Furrion Camera Kit to Work with 2024 GMC Sierra 7-Way

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching