Search: sway control bracket   >  

The door latches for your Furrion RV Refrigerator - 4 Door - Stainless Steel - 14 Cu Ft #FCR14ACBQASS are part #7 in the diagram below and can be activated by simply pushing the doors in until you hear a click noise.

I went out and measured the outside to outside points on the flange for the MaxxAir MaxxFan, part #MA00-04401M, and it's 16-1/4 square. It does fit the standard 14 x 14 vent opening which is what you'll find on most trailers and…

Since the Gas-Flo GR-9950 regulator you have is basically the exact same thing as the JR Products Vertical 2-Stage Propane Regulator #37207-30365, the Vertical RV LP Gas Regulator Cover #37207-30295 will fit just fine.

The handle is actually the on/off switch for the unit and the bolt under the handle is the tension adjustment bolt. You will need to turn the On/Off handle clockwise (tighter) until the handle will stay firmly in place parallel with the main body…

The label side of the Tuson Electronic Sway Control System for Electric Trailer Brakes #335TSC-1000 needs to face forward and be in a vertical orientation perfectly centered on the trailer 5-10 feet back from the center of the king pin like what you…

Using a hitch extender like you mentioned will give you the needed clearance but it will also reduce the weight capacity of your trailer hitch by 50 percent. This is because of the extra play/movement and instability that adding another component…

The electric over hydraulic actuator we recommend the highest is the HydraStar kit part #HS381-8067 that you referenced which is designed for disc brakes. Our installers prefer this kit to all of the other options because of how well it performs and…

We do in fact have both a nickel and stainless steel version of our Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank. The nickel version is part #900b and is the more economical of the two. The stainless steel version is part #902B…

The only trailer tire sensors that will work with the factory TPMS on your 2021 GMC Sierra 3500HD Denali is the GM kit 85110397 that is sold through GM. These sensors will need to replace the valve stems on your trailer wheels. I recommend staying…

The Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW #EQ95-01-5950 you were looking at does come with the L-Brackets, but does not come with the L-Pins. Using the Replacement L-Pins and Clips for…

For your 2011 Suzuki Grand Vitara and Curt hitch #C13001 you can use any ball mount rated for a Class III, 2 inch trailer hitch. The recommended ball mount for the hitch and vehicle is #D-4 and it measures 8-1/2 inches from the center of the hitch…

It sounds like you are looking for a brake mounting flange for your trailer axle. For 4 bolt mounting flanges, we have the following plates available: For 3-1/2 inch axles: #4-50 For 3 inch axles: #DM52415 For 2-3/8 inch axles: #4-35 For 2-3/4 inch…