Can Drums from a Trailer with 10 Inch Hydraulic Brakes be Re-Used When Converting to Electric Brakes
Updated 01/13/2010 | Published 01/12/2010
Products Featured in This Question
Question:
I have a two axle trailer with one axle equiped with hydraulic brakes. I assume I remove the hydrulic brake plates and install new electric brakes plates, wire to standard trailer connector and add a break-a-way kit with battery and charger. I assume I can use my nearly new looking old 10 inch brake drums. Am I correct?
asked by: Carl B
Expert Reply:
With 10 inch brakes, you can re-use your old drums so long as they are in good condition, and not scored or cracked. You would use part # AKEBRK-35R for your right hand side brake assembly and part # AKEBRK-35L for your left hand side.
You could also use Self Adjust brake assemblies that do not require brake adjustment as they automatically adjust to deliver proper braking force. They are part # AKEBRK-35R-SA for right hand side and part # AKEBRK-35L-SA for left hand.
I have also included a link to an installation and wiring video for electric brakes.
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearing Kit Recommendation for 3,500 lb Dexter Axle
- Q&A: Replacement Hubs, Drums, and Brakes for 3,500 LB AL-KO Axle
- Q&A: Replacement Brake Assemblies for a Trailer with 3,500 Pound LCI Axles
- Q&A: Difference Between Trailer Hub Grease Seals 10-40 and 10-19
- Q&A: Replacement Brake Shoes for Dexter 4400 Pound Axles Made Before 2009
- Q&A: Replacement Brakes, Drums, And Bearings For A 2007 American Hauler Trailer With BD-545 AxleTek Drums
- Q&A: Replacement Parts For Dexter 4,000LB Axle Under a 2019 Keystone Hideout LHS Travel Trailer
- Search Results: adjuster
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Search Results: 010~019~00
- Search Results: brake adjuster
- Shop: Dexter Electric Brake Assembly for 4.4K Axles Manufactured Before May 2009 - 10" - Left Hand
- Shop: Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Shop: Dexter Electric Brake Assembly for 4.4K Axles Manufactured Before May 2009 - 10" - Right Hand
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Dexter Electric Brake Assembly for 4.4K Axles Manufactured After May 2009 - 10" - Left Hand
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs