bing tracking image
Q & A Icon

Parts Needed To Add Redarc Brake Controller To 2007 Honda Pilot  

Updated 10/30/2025 | Published 10/06/2025

Question:

Hello, I am looking into the redarc liberty controller for my 2007 Honda Pilot 4WD. Have yall seen this install done before and do you have a guide or know which products are needed? Thank you, Jacob

0

Expert Reply:

Hello Jocob, thanks for reaching out. Yes, it is possible to use the Redarc Brake controller on your 2007 Honda Pilot. If your Pilot already has a 7-way trailer connector, all you will need is the following:

- Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR

This comes with the controller and the universal 4-wire pigtail.

If your Pilot does not have any trailer wiring, we can provide that as well. Here is what you will need:

- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55336

- Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7

Those two wiring kits combined contain everything you need to add a 4-flat and 7-way to your pilot. This includes all of the necessary wires for a brake controller.

Take a look at the videos I linked. They will show you an example of installation.

What kind of trailer will you be pulling?

expert reply by:
0
Jesse M
Jesse M. profile picture

Jesse M.

10/30/2025

Hey Jacob, how did things go with the Redarc Tow-Pro Liberty on your Honda Pilot? Were the wiring kits and videos enough to get everything connected smoothly? Your update could make it easier for the next person setting up the same controller.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>