Replacement Grease Seal for a 3500 Dexter Axle
Updated 10/20/2025 | Published 10/05/2025
Products Featured in This Question
Question:
I need 4 seals for 3500 Dexter axle and I can not find them on your site. Help please. ID 1.35, OD 2.54 Thanks
asked by: Al H
Expert Reply:
Thanks for your question, Al.
I checked the seals that we have and I don't see anything in the size that you are looking for. I checked out some Dexter 3500k hubs, like part # 84546UC3 and the inner diameter is 1.719" and an outer diameter is 2.565". The seal for that would be part # 58846. If you have a Dexter hub, there is usually a number on the hub that we can cross reference. You can also reply to the email with pictures of the hub to make it easier.
(click to enlarge)
Product Page this Question was Asked From
Grease/Oil Seals - Double Lip - I.D. 2.125" / O.D. 3.376" for 5.2K to 7K Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.13 Inch I.D.
- 3.38 Inch O.D.
- TruRyde
more information >
Continue Researching
- Q&A: Cross Reference a Replacement for a TCM 21334 TB Grease Seal
- Q&A: Correct D-Washer for Spindle That measures 1.06" Where the Bearings Sit
- Q&A: Looking for Replacement Bearing Kit and Grease Cap Kit for 2020 Jayco with 3,500 lb Axles
- Q&A: Will etrailer Electric Trailer Brakes Work As Replacement For Dexter 023-105-00
- Q&A: Do I Need to Get the Roadmaster Comfort Ride System with Shocks and Springs
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can A Hub With A 15123 Bearing Be used To Replace A Hub That Used An LM67048 Bearing?
- Q&A: Will The Kodiak Disc Brake Kit K2HR10A11RERR Fit An AL-KO 10k #99 Spindle?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Brake Controls
- Article: Brake Controller Installation: Starting from Scratch
Al
10/14/2025
Sorry I measured wrong. I ordered and received the seals after finding the error. Thanks for understanding. Al