Will etrailer Electric Trailer Brakes Work As Replacement For Dexter 023-105-00
Updated 07/22/2026 | Published 07/15/2026
Products Featured in This Question
Question:
Hello I am needing to replace the brakes on my RV and am wondering if the AKEBRK-6 would be a good replacement for the 023-105-00 that I have on the RV now? The dimensions look the same and the appearance looks the same. Just wanted your input before I pull the trigger. Also, are the Timken bearing seals better quality than the Dexter or eTrailer branded units? Ive had issues twice using the EZ lube axels with the Dexter seals even when getting the wheel off the ground and spinning. Thank you!
asked by: JAMES P
Expert Reply:
Hey James! Yes, the etrailer Electric Trailer Brakes # AKEBRK-6 will work well as a replacement for your current Dexter # 23-105-106 brakes. They have the same capacity, fit a 5-bolt brake flange, and will work with your existing hub and drum assembly. If you need replacement mounting hardware # BRKH12 is also available.
Timken seals are going to be a higher quality compared to our generic seals and Dexter. Are you saying you were adding grease with the wheel off the ground and spinning it? The other grease seal brands typically don't have any issues, so that grease may be pumping a little too fast even though you're following the proper procedure for the EZ lube axle.
What kind of trailer are you working on?
(click to enlarge)
James P.
7/21/2026
Sorry for the delay Robin it’s a 2017 Keystone Sprinter 29BH
Robin H.
7/22/2026
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: 10 36 seal
- Search Results: dexter seal 10 36
- Search Results: brake adjuster
- Shop: Lippert Super Lube Dust Cap and Rubber Plug - 2.72" Diameter - Qty 2
- Shop: Grease/Oil Seals - Double Lip - I.D. 2.125" / O.D. 3.376" for 5.2K to 7K Axles - Qty 2
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Video: etrailer Rust-Resistant Electric Trailer Brakes Feature Review
- Video: Checking Out the etrailer Rust-Resistant Electric Trailer Brakes
- Video: An In-Depth Look at the Electric Trailer Brake Assembly
- Video: Hands-On with the 10-10 Grease or Oil Double-Lip Seals
- Shop: Electric Trailer Brake Assembly - Dacromet - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Electric Trailer Brake Assembly - Dacromet - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Shop: etrailer Rust-Resistant Electric Trailer Brakes - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Comparison of Quality and Weight Rating- etrailer Brand Versus Dexter Brand 12 x 2 Brake Assemblies
- Q&A: Comparing Dexter Electric Trailer Brake Kit and Dexter Nev-R-Adjust Trailer Brake Kit 12" - 7K
- Q&A: What Is The Difference Between Dexter Electric Brakes 23-180-181 and 23-105-106?
- Q&A: Replacement Electric Brakes for an AL-KO 6,000 lb Axle
- Q&A: Comparing etrailer and Dexter Axle 12" Electric Brake Kits
- Q&A: Are The etrailer or Dexter Brakes Going To Be Better For Dexter 6,000LB Axle?
- Q&A: Left & Right 12" Electric Trailer Brake Assembly - Dacromet For 5,200 lb to 7,000 lb Axles
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Suspension Enhancement
- Search Results: trailer wiring
on Trailer Brakes
Thomas R.
7/21/2026
I put these on my enclosed trailer. So far they have worked great!