Does Weigh Safe Adjustable Pintle Hitch Have Slow And Movement That Causes Banging Around?
Updated 10/02/2025 | Published 10/01/2025 >
Question:
I run a skid steer trailer with a lunette ring that bangs around on my old pintle hitches. Does this one pull tighter or still have a lot of slop?
asked by: Brian
Expert Reply:
That’s a good question, Brian. With the Weigh Safe pintle drop hitch with balls # WS59WR (8" drop), you’ll still have some movement between the lunette ring and the pintle - that’s normal with any pintle setup. This is so you can use a variety of lunette rings with the same pintle hitch, and it will stay safe and secure despite standard noise from pintle hitches. Now since this is a brand new setup, it will likely be quieter since it's less worn than your old setup.
The benefit here is that you can easily switch between the pintle for your skid steer trailer and the included hitch balls for standard couplers, all while staying within the hitch’s 15,000-lb capacity. And since it has the built-in scale, you can at least confirm your tongue weight is right where it should be, which helps reduce sway and rough handling even if the pintle connection has some play.
What type of load are you normally hauling?
Product Page this Question was Asked From
Weigh Safe Pintle Hitch w/ Built-In Scale w/ Balls for 2" Hitch - 8" Drop - 15K - Steel
- Pintle Hitch
- Pintle Hook - Ball Combo
- Adjustable Height
- 15000 lbs GTW
- 2 Inch Hitch Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Standard Shank
- Weigh Safe
more information >
Featured Help Information
Instructions
Continue Researching
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Will Weigh Safe TW Scale Drop Hitch With Pintle And Balls Work In Rise Position?
- Q&A: What Size Drop Hitch For Lifted F250 Truck With Dump Trailer That Sits Too Low - 2" Receiver
- Article: Steel vs. Aluminum Ball Mounts
- Q&A: Are Inner Brackets of B and W Gooseneck Hitch Needed When Installing In 2026 Ford Truck
- Q&A: Recommended Trailer Hitch for Lance 2185 Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Class V Trailer Hitch that can Fit Army Truck with 34 inch Wide Frame Rails
- Q&A: Recommended Hitch for a 2001 Ford F-450 Cab and Chassis
- Q&A: Distance Between Mounting Holes On the Curt Trailer Hitch Receiver C15445
- Article: Determining Trailer Tongue Weight
- Article: What Do I Need To Tow A Trailer?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Measure Your Trailer Wheel Bolt Pattern

