Replacement Right Rear Leg For Lippert Ground Control 3.0 System
Published 09/25/2025
Products Featured in This Question
Question:
I have a damaged right rear Lippert Ground Control 3.0 System jack assembly that I need to replace on my 2022 Flagstaff Super Lite 529RLBS fifth wheel. The damaged one has a galvanized metal not black painted foot thats attached to an adjustable leg with three holes for different height adjustments. From all the pictures and videos Ive seen there are only two types available as replacements. One has a separate foot plate that attached to the inner portion of the jack that raises and lowers the unit and the other is a foot thats fixed to the leg. Neither is adjustable like my original. Th rest of the replacements look exactly the same. Is there another model exactly like mine? Will either of the other two types work if I mix a new one on the right with an original adjustable one on the left? What issues will I have with auto leveling, if any?
asked by: Andy L
Expert Reply:
Hello Andy, thanks for reaching out. There is not another model available aftermarket that will be exactly like yours. You can still use the "non drop leg" versions to replace it. You will just need to measure the overall height of the retracted leg and select from one of the following:
-Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System # LC428493
-Replacement 24-1/2" Right Rear Leg - Lippert Ground Control 3.0 Electric Leveling System # LC344792
The 22-1/2" and 24-1/2" measurement is the retracted height. Measure the undamaged right rear leg and pick whichever one matches.
(click to enlarge)
Product Page this Question was Asked From
Replacement 24-1/2" Right Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Lippert
more information >
Continue Researching
- Shop: Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System
- Shop: Replacement Hydraulic Jack Assembly for Lippert Level Up System - Black - 21-1/16" - 8K
- Shop: Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System
- Q&A: What Left Rear and Right Rear Hydraulic Jacks do I Need for My Lippert Ground Control 3.0?
- Q&A: What Control Module do I Need to Replace My Lippert 346005 on My Lippert One Contol?
- Q&A: Identifying Lead/Follow Leg on Lippert Level Up RV Leveling System
- Q&A: Replacement Brackets And Legs For A Lippert Ground Control 3.0 Leveling System
- Q&A: How To Choose the Correct Replacement Rear Jack for a Lippert Ground Control Leveling System
- Q&A: Determining Correct Replacement Right Middle Jack For Lippert Ground Control 3.0
- Q&A: Replacement Right Rear Lippert Ground Control Jack Leg that is 24-1/2 inches Tall
- Article: Performance Chips and Modules
- Article: Best Bike Racks for Electric Bikes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: What Size Generator Do You Need to Run an RV Air Conditioner?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
Andy L.
9/25/2025
Thanks Jesse. One additional concern. When auto leveling I always extend the adjustable section to the third hole, fully extended before starting to auto level. That would mean the new jack would need to extend much further to be equally extended with the other side. Does that mean the new one will extend further to make up the difference? Will the system recognize this with the two different jacks?