Need Pre-Greased Hub And Castle Nuts For Dexter 3,500 lb Axle
Updated 10/22/2025 | Published 09/22/2025
Products Featured in This Question
Question:
I have a Dexter 3500lb axle, Dexter Part number for the axle is 120510 5-4.5 spacing. I need a complete greased hub with castle nut and retaining rings. please supply part number
asked by: Jack T
Expert Reply:
Hello Jack, sure thing! We do offer a pre-grease hub that will fit your Dexter 3,500 lb axle. I recommend the following:
- Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K
This comes with the pre-greased hub, grease cap and lug nuts. The castle nuts are sold separately as part # 165686. The retainer nuts are part # 6-190.
What kind of trailer is this for?
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer
- Q&A: Replacement Hub for AxleTek Hub # BD2-545-17
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Recommended Braking Hub w/ a 5 on 4-1/2 Lug Pattern and Brake Assemblies for a Lippert 3,500 lb Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: Parts Needed To Add Electric Drum Brakes To Boat Trailer
Jesse M.
10/22/2025
Hey Jack, how did the pre-greased hub for your Dexter 3,500 lb axle work out? Did the castle nut and retainer fit the way you needed? Your update could make it easier for others working with the same axle setup.