Replacement Drive Arm for Lippert Edge Awning

Question

Question:

Hello i am looking for the front arm only the motor is fine. The arm is damaged. Here is the info that is on the sticker. edgexbk-58-sldbk-topw re-7hdwledblu Hope to hear back from you soon thank you.

asked by: Pete

0

Expert Reply:

Hi Pete; according to Lippert the only option for replacement on the Edge is the complete individual arms # LC62ED (idler) or # LC22ED (drive). Since it is the arm with the motor you will need to replace it with the drive arm assembly # LC22ED.

expert reply by: Robin H

0

Pete

9/16/2025

I need the full arm. If it only comes with the motor guess that will have to do. My motor is fine tho

Robin H.

9/16/2025

@Pete I'll double check with Lippert to be sure. A lot of the Edge awning parts are gone but it may be available or an alternative might work. If they have it I will be able to add it to our site.

Robin H.

9/16/2025

@Pete I updated the answer above. Unfortunately, they confirmed the only option is the complete arm assembly.

Pete

9/16/2025

@RobinH okay great can you send me the link to order and cost shipping cost to land o lakes florida

See All (4) Replies to Pete ∨

Answer 1

In order to determine the correct replacement for your Lippert Edge awning you'll need to measure the length of your wall mount (see attached photo). Once you've got that number you can look for a replacement based off of that measurement.…

view full answer...

Answer 2

Since you said you have the 58 inch arms that would indicate that you have the Lippert Edge awning which we have just the replacement arms for. For the idler arm you'd want the part #LC62ED and for the driver arm part #LC22ED.

view full answer...

Answer 3

Since your Solera arm is 58 inches long that would indicate it's a Solera Edge awning which means for a replacement drive arm you would want the part #LC22ED or for a replacement idler arm part #LC62ED.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Drive Arm for Lippert Edge Awning

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching