bing tracking image
Q & A Icon

Getting e3 Error Code When Installing A Furrion Chill HE AC  

Updated 08/20/2025 | Published 08/17/2025

Question:

I have ordered the Furrion Chill HE 13.5k RV roof air conditioner model FACR13HESA-PS with the power controller FACC10SA-BL and the thermostat FR33PR. I am running into an e3 error even though Ive been wiring it up directly to the controller to avoid any shorts in the run of wire to the desired thermostat location. Is this because I have the wrong controller or thermostat for my specific unit? If so what should I be using or what am I doing wrong.

0
Furrion AC Parts
Furrion AC Parts
(click to enlarge)
Furrion AC Parts
Furrion AC Parts
(click to enlarge)
Furrion AC Parts
Furrion AC Parts
(click to enlarge)
Furrion AC Parts
Furrion AC Parts
(click to enlarge)

Expert Reply:

Hi Eric!

The FACC10SA-BL (our part # FR86NR) is what is causing the issue. The e3 error code you are getting is a communication error between the thermostat and control box and confirms the FACC10SA-BL being where the problem is.

Since you have the Furrion Chill HE 13,500 BTU R410a Air Conditioner # FR26PR and the Chill HE Thermostat # FR33PR, you need the Replacement Single Zone Controller for Furrion Chill HE RV Air Conditioner Setup # FR43PR. This is specific to the R410a coolant variation of the Chill HE units and will solve all the problems you are having.

Out of curiosity, what are you installing all this on?

expert reply by:
0
Lazer S
Eric profile picture

Eric

8/19/2025

Much appreciated, thank you for the information and the timely response. We plan on installing it on our trailer it's a casa villa 40' park model.

Lazer S. profile picture
Etrailer Expert

Lazer S.

8/20/2025

@Eric You're very welcome! Let me know if there is anything else I can help with. : )

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>