2021 Jay Feather 24BH Replacement Leaf Springs
Updated 09/02/2025 | Published 08/11/2025
Products Featured in This Question
Question:
I need two leaf spring for a 2021 Jay Feather 24BH camper VIN XXX.
asked by: Brent S
0
Expert Reply:
Hey Brent, thanks for reaching out!
Your 2021 Jay Feather 24BH will have 3,500 lb axles so you'll likely need one of the following:
- 27" Long Leaf Spring # e97SR
- 25-1/4" Long Leaf Spring # e54SR
I don't have a way to look up the exact dimensions of your leaf springs, but if you lift your trailer up by the frame to take the weight off of them, then you'll be able to measure the length (center eye to center eye - C dimension in the attached photo) and let me know!
expert reply by:
Jon G
0
Leaf Spring Dimensions
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 27 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Which Dexter E-Z Flex Equalizers Fit 2002 Bass Cat Jaguar Trailer
- Article: Double-Eye Trailer Suspension System Review
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Leaf Spring for 2015/2016 Riverside Retro 195
- Q&A: Replacement Hub/Rotor Assembly for a Dexter Boat Trailer Axle DX67HR
- Q&A: Recommended 25-1/4" Leaf Springs w/ 4 Leafs for a 5,000 lbs Axle
- Q&A: Replacement Leaf Springs and MORryde X-Factor Crossmember for 2021 Grand Design Imagine 2400BH
- Q&A: Can I Upgrade My 3,500 lb Leaf Springs To 5,000 lb Springs If The Measurements Match?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: How to Replace Trailer Leaf Springs in 5 Steps
Jon G.
9/2/2025
Hey Brent, did you have a chance to measure the length of your leaf springs to determine which one you need? If you're still looking for a solution, I'm happy to help!