Does DA86 Demco Drum Brake Actuator 8,600lbs Include Bolts To Install?
Updated 08/15/2025 | Published 07/21/2025
Question:
Does the DA86 include the bolts for installation? – Sheila
asked by: Sheila
0
Expert Reply:
Great question, Sheila; mounting hardware isn’t included in the Demco 8,600lb drum brake actuator # DM78CV, but you’ll need four 1/2" x 4-1/2" Grade 5 bolts to install it to a standard 3" wide trailer tongue.
Be sure to use lock nuts and washers, and torque the bolts properly for a secure and safe fit. As you can see in the attached image, Demco recommends 75 ft lbs of torque.
Was your old one welded or bolted on?
expert reply by:
Andrew N
0
Demco brake actuator torque specs
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Demco DA86 Brake Actuator for Disc Brakes w/ Lockout, Solenoid, and Cover - 2" Ball - 8,600 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 8600 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Manual Lockout
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Looking For A Demco DA86 Actuator For Drum Brakes Specifically
- Q&A: Solution for Needing Replacement Caliper for Kodiak 204 Caliper
- Q&A: Reverse Lockout Solenoid For Dexter DX12.5 Actuator
- Q&A: Replacement 250-031468 Seals Needed for Reliable Oil Bath
- Q&A: Replacement Reliable CL-1000 Calipers for Hydroglide Trailer
- Q&A: Replacement Disc Brake Caliper for Reliable CL-1000
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Trailer Maintenance Schedule
Andrew N.
8/15/2025
Hey Sheila, did you find out if your old actuator was welded or bolted on? I'm asking because I want to make sure you have everything you need for a smooth installation. Let me know if you need more help!