Demco DA75 Disc Brake Actuator For Tandem Trailer With Kodiak Disc Brakes
Updated 08/15/2025 | Published 07/21/2025
Products Featured in This Question
Question:
Will this actuator handle a tandem axle setup with Kodiak disc brakes? thank you, Belinda
asked by: Belinda
Expert Reply:
Yes it will, Belinda. As long as your total loaded trailer weight stays under 7,500 lbs, the DA75 Demco Disc Brake Actuator # DM33CV can absolutely support tandem axle disc brakes.
Just make sure the brake lines and calipers are in good condition. It also has a built-in reverse lockout solenoid so that you can wire it up and reverse your trailer properly without locking the brakes up like some actuators.
Also, our customers have had very good luck using the Demco hydraulic actuators with the Kodiak brakes; those are solid!
Product Page this Question was Asked From
Demco DA75 Trailer Brake Actuator for Disc Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Demco
more information >
Continue Researching
- Shop: Demco DA75 Trailer Brake Actuator for Disc Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Brass Flares - 1/8" ID - 19'
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 7'
- Q&A: Replacement Coupler Recommendation for Fulton A50 Actuator
- Video: Let’s Check Out the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Video: Review of Demco Brake Actuator - DA75 Trailer Brake Actuator - DM33CV
- Video: Review of the Kodiak Hydraulic Brake Hose
- Video: Review of Titan Brake Actuator - T4820000
- Shop: Dexter Surge Brake Actuator - Disc - Elec Lockout - 2" Ball - Zinc - 7.5K - 3" x 5"
- Shop: Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators - Disc
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Q&A: Fit And Compatibility Of The Kodiak 10" Rotor With The UFP DB35 Brakes
- Q&A: What do I Need to Convert My 3,500 Pound Kodiak Disc Brakes from Grease to Oil Bath?
- Q&A: Recommended Disc Brakes In Stainless Steel For Boat Trailer With 3500 lb Axles
- Search Results: vault
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: Parts Needed To Add Disc Brakes To A 2002 EZ Loader Trailer With No Brakes
- Search Results: trailer tires and wheels
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Suspension Enhancement
- Video: Curt Mounting Bracket for 4-Pole Flat Trailer Connector Review
- Search Results: trailer jack
on Brake Actuator
Andrew N.
8/15/2025
Hey Belinda, did the Demco actuator work well with your tandem axle setup and Kodiak disc brakes? I'm asking because I'd love to know how it turned out for you and to help others who might have the same setup!