Replacement Bronze Bushings for Equa-Flex Cushioned Equalizers

Updated 07/22/2025 | Published 07/17/2025

Question:

Upper mounting bolt bushing on Equaflex is worn. There are actually 2 bushings that are smaller in outside dia. than the spring eye bushings. Where can I obtain these bushings. They are 9/16 i.d. The hole in the top of the equaflex measures .650.

asked by: Jack S

Expert Reply:

Hey Jack. If your Equa-Flex Cushioned Equalizers came with bronze bushings you can replace them with the Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1 item # D014-077-00. These will replace all three bushings on the equalizer.

What model Equa-Flex Cushioned Equalizers do you have? There should be a part number on the front of them. Some of these came with Never Fail bushings already installed. These won't be bronze and you would need to contact Lippert for a warranty replacement.

expert reply by: Jerred H

Bronze Bushing
(click to enlarge)

Jack S.

7/22/2025

Thanks for your reply. The hole for the upper mounting bushing measures 655. The bushings you reference are 700 od. Won't fit. I decided to go with the Dexter equalizer. Thanks again