Will This Hardware Work With The Platinum Series Nerf Bars?

Question

Question:

Will this work with the 21-4095 Platinum Nerf Bars?

asked by: Jeff

0

Expert Reply:

Hey Jeff,

For your Ram 1500 Classic the replacement hardware for the Platinum Series nerf bar is # 21-355PK. Those are the custom brackets for your specific vehicle that can be paired with the 21-3555 Platinum bars 4" oval.

Do You already have that model Platinum bar? It most likely is for another vehicle which is why the hardware for your truck is not coming up as a confirmed fit for that model bar.

expert reply by: Nick S

0

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 3

The PL code on the Tekonsha P2, #90885, indicates that there is a power loss while you are stepping on the brakes. The first thing I would check is the red wire. Using a circuit tester like #PTW2993, test the red wire when you step on the brake. It…

view full answer...

Answer 4

I may have a solution for you, but the #23-231PK are designed for round nerf bars that fit on 2002-2009 Ram trucks and not a 2020 Ram 1500. If you've got Westin brand steps on your 2020 Ram 1500 Classic like the Westin Platinum Series Oval Nerf…

view full answer...

Answer 5

Yes, we do have the replacement brackets/hardware for the Westin Platinum Oval running boards that fit your 2012 Dodge Ram 1500 Quad cab. The brackets/hardware are going to be specific to both your truck and the nerf bar itself. The Replacement…

view full answer...

Answer 6

Hey Rick, so we had a customer send us a picture (see attached) where they took that measurement for us and basically from the top of the hitch ball down to the bottom of the shoulder is 7 inches. This is essentially another way of measuring how tall…

view full answer...

Will This Hardware Work With The Platinum Series Nerf Bars?

Product Page this Question was Asked From

Continue Researching