Install Harness for Tekonsha Brake Controller 2025 Nissan Pathfinder

Question

Question:

I like the wiring harness for under the dash connector on my 2025 Nissan Pathfinder with a tow package. I already have this controller. I just need to plug it in under my dash. https://www.etrailer.com/Trailer-Brake-Controller/Tekonsha/TK90160.html

asked by: Tom L

0

Expert Reply:

Hey Tom, for your Tekonsha brake controller to install in your 2025 Nisssan Pathfinder you would want the install harness part # C51382 which plugs into the port under your dash. You would need to cut off the Curt side of the connector and wire it by color to the Tekonsha universal harness since we don't have a Tekonsha harness that fits your vehicle at this time.

expert reply by: Jameson C

0

Jameson C.

8/7/2025

Hey Tom, how did the installation of your Tekonsha brake controller go with the Curt wiring adapter? I'm curious to know if the solution worked well for you, as it could help others in a similar situation!

Answer 1

It appears the wiring to connect a Trailer Brake Controller #90195 on your 2024 GMC Yukon are going to be high up on your dash close to the left side of the drivers compartment. You can start by removing the left side panel of the dash which sits up…

view full answer...

Answer 2

Hey David, thanks for reaching out and providing all of the information! I took a look at all of the running boards that fit your 2018 Ram ProMaster 3500, and they all look to mount in the same locations as the Aries RidgeStep Running Boards w/…

view full answer...

Answer 3

To install a Tekonsha brake controller on your 2022 Ram 1500 you will just need the Wiring Adapter #C51458. The gray plug will connect to your vehicle under the dash and then you'll cut off the black connector and splice it (per color) to your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

Good morning Brett, Yes, the Curt Spectrum Brake Controller w/ Custom Harness - Dash Mounted Knob #C28SV and the Curt Echo Under-Dash Bluetooth Brake Controller w/ Custom Harness #C46GV will both work just fine in your 2026 Ram 1500 Rebel. They are…

view full answer...

Answer 10

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 11

Hey Gina, thanks for reaching out. Yes, the Air Lift 1000 Air Helper Springs #AL63WQ will fit your 2025 Nissan Pathfinder Rock Creek. They're designed to install inside the factory rear coil springs and are a great option for helping reduce…

view full answer...

Answer 12

Thanks for reaching out, Dennis. Yes, if you purchase the Yakima LockNLoad Platform Roof Tray #Y05044 along with the Crossbar Clamps for Yakima LockNLoad Platform Rack #Y05039, you'll receive all of the hardware needed to assemble the tray and…

view full answer...

Install Harness for Tekonsha Brake Controller 2025 Nissan Pathfinder

Products Featured in This Question

Continue Researching