Looking For Replacement For 8-219 Hubs
Updated 09/02/2025 | Published 06/26/2025 >
Products Featured in This Question
Question:
I have dexter axles, got a few numbers on the face of the drum/hub. Not sure which I should refer to as a part number. I have 8-219. 5B27. WF 7. Im thinking the 8-219 but dont wanna order without assurance, thanks!
asked by: Tristin
Expert Reply:
Hello Tristin, thanks for reaching out. You are correct the 8-219 is the part number for your hub. This hub uses a # 25580 (1.75" inner diameter) inner bearing and # 14125A (1.25" inner diameter) outer bearing. The seal is a 2.125" ID/3.376" OD. There are a few options for a replacement hub, so please select from the following:
1/2" Wheel Studs Grease Cap # 8-219-4UC3
1/2" Wheel Studs EZ-Lube Cap # 8-219-4UC3-EZ
1/2" Wheel Studs Oil Bath Hub # 8-219-9UC3
9/16" Wheel Studs Grease Cap # AKHD-865-7-1-K
9/16" Wheel Studs EZ-Lube Cap # 8-219-13UC3
9/16" Wheel Studs EZ-Lube Cap # 8-219-18UC3
All of these kits include the brake drum, bearings races, seals, caps and lug nuts.
If you are looking for brakes also, use the Dexter Electric Trailer Brake Kit # 23-180-181 for manual adjust, or the Dexter # 23-464-465 for self adjusting.
Are there any other parts you are looking for? Let me know.
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Continue Researching
- Q&A: Which Leaf Spring Is The Best Replacement For A Bouncy 2019 Grand Design Momentum 351m 7K Axles?
- Search Results: dexter 8~219
- Search Results: dexter 8 219
- Search Results: dexter 7k hub
- Search Results: morryde trailer suspension parts
- Search Results: nautilus shower door
- Search Results: 9/16 lug nut
- Search Results: 7k axle leaf springs
- Q&A: Lug Nuts For 2022 Grand Design Solitude
- Shop: Lippert U-Bolt and Nut Kit for 8,000-lb Trailer Axles - 3" Wide
- Shop: Lippert Road Armor Shock-Absorbing Equalizer Kit - Tandem Axle - 3,500-8,000 lbs
- Shop: Replacement Adjuster Screw and Spring Kit for Lippert Electric Brake Assemblies
- Shop: Lippert Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5.2K to 7K
- Shop: Terran Industries 6-Leaf Double Eye Spring for 7,000-lb Trailer Axles - 25-1/4" Long
- Video: The Low-Down on the Dexter Shackle Bolt for Double Eye Springs
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Q&A: Correct 1/2 Wheel Stud for Dexter 7K Axle
- Q&A: What Kind of Lug Nut Do I Need For the Cooper Work Series 215/75R17.5 # LH28FR ?
- Q&A: Replacement Bushing for a Lippert Road Armor Equalizer
- Q&A: Choosing Between Dexter Axle and Axle-Tech Replacement Brakes for a 2009 Palomino Pony Pop-Up
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Video: Review of Redline Trailer Bearings Races Seals Caps - Oil Cap - RG04-230




Jesse M.
9/2/2025
Hey Tristin, did you end up choosing one of the replacement hubs I suggested? I'm curious to know how it worked out for you, as it could help others in a similar situation.