Will MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002 Work with MaxxAir 4 Speed Fan

Question

Question:

I’m trying to figure out how to see if the maxx air vent cover EX clip would work with my maxx air fan 4 speed I have a Jayco 2019 north point 377rlbh

asked by: Justin C

0

Expert Reply:

Hey Justin, yes the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002 will work with the MaxxAir 4 speed fan setup you have now. This was designed to fit the Maxxair vents and the clip system would work without any type of modification.

expert reply by: Jameson C

0

Maxxair Roof Vent and Cover
(click to enlarge)

Justin C.

6/4/2025

Ok thank you. Is there a way to also measure for this fit? The info says most will fit 14x14 so just to make sure how would measure my vent out side to outside or inside to inside ?

Jameson C.

6/4/2025

@JustinC The 14 inch by 14 inch is the cut out dimension in the roof of the RV. If you have a MaxxFan though this is the size you have as they only make the one size.

Justin C.

6/4/2025

@JamesonC thank you I appreciate that.

Jameson C.

6/4/2025

@JustinC No problem!

Answer 1

Hi Lou; the MaxxAir FanMate RV and Trailer Roof Vent Cover is the best fit for your #MA00-04500K. The following colors are available: -MaxxAir FanMate RV and Trailer Roof Vent Cover - Smoke #MA00-955003 -MaxxAir FanMate RV and Trailer Roof Vent Cover…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 6

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 7

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 8

Hey Michael! The 2026 Kia Sportage Hybrid has the 12V battery integrated into the main battery so you won't be making a connection there. What you need to do is run the #C59236 hot lead to the 12V positive jump terminal under the hood. Everything…

view full answer...

Answer 9

Hi Ray! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 11.5K to 14K Trailers #MR74MV can definitely be used in a short bed 3/4 ton pickup, like your 2024 Ram 2500. Just be aware that not all trailers have a tapered nose and you may not get…

view full answer...

Answer 10

The steps are approximately 19.415" in width for the MORryde Flip Tread RV Steps #MR42UR. To get wider steps you would need to size up in mounting width to something like the #MR28RR, but would need to have enough room for the steps to properly…

view full answer...