Does Battery Type Need to be Selected When Installing Go Power MPPT Solar Charge Controller

Question

Question:

i have a agm battery now but i want to put a lipo4 on the camper do i have to change anything on the controller

asked by: joe

0

Expert Reply:

Hey Joe, the MPPT converter you mentioned actually isn't made anymore but we do have the Go Power part # GP32QR which is also a 30 amp MPPT converter that is lithium compatible. You would need to select the battery type on the charge controller's touch screen.

Do you have a battery picked out already?

expert reply by: Jameson C

0

Jameson C.

9/12/2025

Hey Joe, did you decide on a lithium battery for your camper yet? I'm asking because I want to ensure others can smoothly transition to lithium batteries too.

Answer 1

Hello Chuck, The correct screen for the Go Power MPPT Solar Charge Controller – PowerTrak – 12V and 24V – 30 Amp #GP32QR is the Go Power PowerTrak Screen – Touchscreen RV Control Panel – Auto-Dimming – Multi-Orientation #GP64XR. The Go Power!…

view full answer...

Answer 2

Hey Carly, thanks for all of the information. Since you're only adding another 200 watt solar panel with the Go Power Overlander Expansion Kit item #34282182, all you need is the 30 amp Go Power MPPT Solar Charge Controller item #GP32QR. What…

view full answer...

Answer 3

Hi Matt, the easiest way to add a remote on and off control to your Victron MultiPlus-II part #VN73VR is by using the Victron VE.Bus Smart Dongle, part #VN27ZR, which lets you use your phone to turn the inverter on and off, monitor it, and adjust…

view full answer...

Answer 4

Great question, Sonia. Yes, the #GP85QR charger can be configured for lithium, AGM, or flooded lead-acid, and you can adjust those settings through the remote or the app. Once set, the inverter remembers the profile, even if you disconnect the…

view full answer...

Answer 5

Hey Brad! I just went over this with Dometic/Go Power and you will need several wiring harnesses in addition to the #GP74XR you already picked up. To connect the Go Power PowerTrak Screen #GP64XR, Pure Sine Wave Inverter Charger #GP85QR, and MPPT…

view full answer...

Answer 6

Hey Gary, welcome back! It definitely sounds like there is an issue with your Furrion controller. If it's switching from the lithium battery profile back to flooded on its own each night, I think it is best to go ahead and replace it before you…

view full answer...

Answer 7

Hi David, thanks for reaching out! The older Go Power PWM-30 Solar Controller has been discontinued, but you can use the Go Power PWM Solar Charge Controller with Bluetooth #GP76QR along with the Installation Adapter Plate #GP86QR to replace it! I…

view full answer...

Answer 8

Yes, Marsha, that’s exactly what the #GP85QR is built for. Unlike the single-leg 30A #GP44XR, this one outputs on both legs, so it ties directly into a 50A distribution panel and supplies up to 3,000 W (not going to power the entire AC system of…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Does Battery Type Need to be Selected When Installing Go Power MPPT Solar Charge Controller

Product Page this Question was Asked From

Continue Researching