Will Scale of Weight Safe Ball Mount with Scale Break When Hitting Bumps
Updated 09/29/2025 | Published 05/11/2025 >
Question:
Good morning, I just learned about Weighsafe a little bit ago. So I apologize if the information is out there and I’ve not found it yet. But what protects the weigh safe from being damaged and exceeding the weight on the scale during towing and the dynamic load movement while driving down the road?
asked by: Tim T
Expert Reply:
Hey Tim, this is a great question but the scale inside the Weigh Safe Hitch w/ Built-In Scale for 2" Hitch # WS78RR that you referenced was designed to be able to withstand the additional weight that would get put on it when hitting bumps so it would not get damaged. Basically once the scale maxes out the ball stops pushing on the scale and instead pushes on the ball mount platform so it would just push through the scale and break it. Do you know about how much the tongue weight of your trailer is?
Product Page this Question was Asked From
Weigh Safe Hitch w/ Built-In Scale for 2" Hitch - 6" Drop/7" Rise - 15K - Steel
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Two Balls
- 2 Inch Ball
- 2-5/16 Inch Ball
- Steel Shank
- Drop - 6 Inch
- Rise - 7 Inch
- Fits 2 Inch Hitch
- 15000 lbs GTW
- Built-In TW Scale
- Weigh Safe
more information >
Continue Researching
- Video: Review of Weigh Safe Trailer Hitch Ball Mount - WS48ZR
- Shop: Weigh Safe Aero Hitch for 2" Hitch - 4" Drop/5" Rise - 12.5K - Steel
- Video: Review of Trimax Locks Trailer Hitch Ball Mount - Razor Ultra Aluminum 2 Ball 2 In Hitch - TMX63QR
- Video: Comparing Weigh Safe Ball Mounts
- Shop: Weigh Safe Hitch w/ Built-In Scale for 2" Hitch - 4" Drop/5" Rise - 12.5K - Aluminum
- Q&A: Availability of 2-5/16" Ball For Weigh Safe Aero Hitch
- Shop: Weigh Safe Hitch w/ Built-In Scale for 2" Hitch, 6" Drop/7" Rise, 12.5K, Aluminum
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens
- Shop: Identification Light Bar for Trailers over 80" Wide - Submersible - 9 LEDs - Silver Base - Red
- Shop: Identification Light Bar for Trailers over 80" Wide - Submersible - 9 LEDs - Silver Base - Red
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Video: Review of Weigh Safe Trailer Hitch Ball Mount - Built In Scale Hitch 2 Balls 2 Inch - WS78RR
- Video: A Closer Look at the Weigh Safe Hitch with Built-In Scale
- Video: LED Identification Light Bar for Trailers over 80" Wide Spec Review
- Shop: Trailer Hitch
- Video: Review of Weigh Safe Built In Scale Hitch 2 Stainless Steel Balls 2 Inch Receiver - WS96ZR
- Shop: Brake Controller
- Q&A: How Far Down Does B and W Tow and Stop Ball Mount # BWWTS10043B Sit When In Lowest Position
- Q&A: Weigh Safe True Tow Weight Distribution System For 7,600 Pound Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can Weigh Safe Hitch w/ Scale Be Used With Sway Control
- Q&A: Recommended Locking Pins for Weigh Safe Aero Adjustable Ball Mount
- Q&A: Installation of Curt Front Mount Trailer Hitch Receiver # 31038 on 2003 Ford F-150 4 x 4
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Weigh Safe Weight Distribution System for a 7,600 lbs Travel Trailer
- Article: Determining Trailer Tongue Weight
- Article: Hitch Anti-Rattle Devices: The Ultimate Guide
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide


Jameson C.
9/29/2025
Hey Tim, did you have a chance to check the tongue weight of your trailer? I'm asking to ensure others can confidently use the Weigh Safe Hitch without concerns about potential damage.