Looking For New Equalizer And Hangers For 1997 Hudson 10K Equipment Trailer

Updated 10/02/2025 | Published 05/08/2025

Products Featured in This Question

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

(60)

$273.21

Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 1" Center Hole

(102)

$99.73

Center Hanger for 2" Wide Slipper Springs - 4-1/2" Tall - 7/8" Bolt Hole

(29)

$37.34

Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 7/8" Center Hole

(180)

$47.77

Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter

(184)

$35.48

Question:

Hello, I have a 1997 Hudson 10k equipment trailer. I’m looking for new equalizers and the weld on bracket. My equalizers a 13 1/8” long and Takes 2” slipper springs and the bracket is 3” wide x 4 1/2” tall from frame to bottom of bracket. I haven’t been able to find a bracket that meets my spec. I also am looking for a set of greaseable spring eye pins and brass spring eye bushings. Thanks!

asked by: Adam

Expert Reply:

Hello Adam, thanks for reaching out. We do carry the 13-1/8" long equalizers for 2" slipper springs. We have the # 13-117-03 which is for a 1" center hole, or the # TREQ1344 which is a 7/8" center hole.

As far as the hanger, we may have an option for you, but hangers are measured from the top of the hanger to the center of the hole. Take the Center Hanger for 2" Wide Slipper Springs # 29-5-1 for example. It is 4-1/2" tall from top to center hole. It works with a 7/8" diameter bolt.

For a went bolt we have part # TRFA71063 which is a 7/8" diameter equalizer bolt.

Sadly it does not look like we offer the brass bushings in this size.

expert reply by: Jesse M

Center Hanger for 2 Wide Slipper Springs 29-5-1
(click to enlarge)

Jesse M.

9/29/2025

Hey Adam, did you find the right hanger and equalizers for your trailer? I'm curious to know how it worked out for you, as it might help others facing a similar challenge.