Replacement Landing Gear for a 2007 Keystone Cougar 5th Wheel Trailer
Updated 05/05/2025 | Published 04/21/2025 >
Products Featured in This Question
Question:
Will your Lippert HD 6,500lb 5th Wheel Landing Gear Motor work as a replacement motor for our 2007 Keystone Cougar 5th wheel? Our old motor has a rpm of 7140. I wasnt sure of the rpm rating on your motor. Thank you
asked by: Mandy W
Expert Reply:
It might! What kind of landing gear system do you have on your 2007 Keystone Cougar 5th Wheel? There's no database that shows me part numbers on trailers. If you could find out what system you have or any part numbers on the motor and leave this information in the comment box below I'll be able to look up which one you need.
The Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor item # LC196308, you were looking at, has a lower RPM of 5400 RPM vs 7,140 RPM you have now. If the connections look the same on your motor you most likely need the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor item # LC141893. I attached a picture below so you can compare.
If you get that information around or have any additional questions you can throw them into the comment box below.
Product Page this Question was Asked From
Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Motor
- Lippert
more information >
Continue Researching
- Search Results: landing gear parts
- Shop: Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor
- Search Results: motor
- Search Results: venture landing gear motor
- Shop: Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor
- Shop: Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs
- Q&A: How to Choose the Correct Replacement Landing Gear for 5th Wheel Trailer
- Q&A: Replacement Landing Gear for 2007 Cougar
- Video: Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear Spec Review
- Q&A: Replacement Motor Recommendation for a Jack ADTH 1RV-200 on a 2006 Keystone Raptor 37
- Q&A: ADTH 1RV-200 Replacement Landing Gear Motor
- Shop: Replacement High Speed Motor for Stromberg Carlson Electric Landing Gear - 5,000 lbs
- Video: Review of Stromberg Carlson Replacement Motor - SC68QR
- Shop: Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs
- Shop: Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"
- Q&A: Replacement Landing Gear for 2005 Montana 5th Wheel Trailer
- Shop: Replacement 5th Wheel RV Landing Gear Follow Leg w/ Snap Pin for RVs
- Video: Breaking Down the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear
- Video: Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor Review
- Search Results: door handle extension
- Search Results: lippert rv door parts
- Search Results: latchxtend
- Q&A: Replacement Landing Gear Motor for a 8532-07 Motor
- Q&A: Faster Motor Replacement for Venture M9000PK Landing Gear
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Best Landing Gear
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box



Model #.
5/3/2025
Hi Jarred, the model # on our original motor is 106504101201 Does this help?