Replacement Spindle Grease Seal Set for L44649 Inner Bearing on a BT Spindle
Updated 10/22/2025 | Published 04/07/2025
Products Featured in This Question
Question:
I believe I have a BTR 1 1/16inch spindle on a jet ski trailer. Im replacing bearings, races, and seals. Bearings: L44649 Races: L44610 Original seal: 10-9? The spindle had what appears to be a repair sleeve on it which I removed. The OD of this sleeve was 1.5. The OD of the spindle seal mating surface without the sleeve is ~1.46inch . Where can I find the appropriate repair sleeve and seal? Thanks
asked by: Jared S
Expert Reply:
Hey Jared. It sounds like your jet ski trailer has the Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy item # BB60005. What you're talking about is a wear sleeve which is included with this set.
Then you would just need the Replacement Trailer Hub Bearing item # L44649 and the Replacement Race item # L44610.
These parts will take care of one hub. If you have any additional questions go ahead and throw them into the comment box below.
(click to enlarge)
Product Page this Question was Asked From
Dexter Bearing Kit w/ Dust Cap for 1-1/16" BTR Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- Dexter
more information >
Continue Researching
- Q&A: What Does Harness on 2017 Ford Explorer Look Like for Trailer Wiring
- Q&A: Do You Know the Difference Between a 11033 Hub and My 11033L Hub?
- Q&A: When Using Bearing Buddy Bearing Protectors Do I Need To Repack Bearings Periodically?
- Q&A: Difference Between Bearing Buddy 1980 Models
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: Hubs, Bearings, and Rotors Part Numbers for FourWinns 2008 Trailer Model DO204KT
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Looking For Replacement Brake And Hubs For Trailer With 92655 Hubs
Jerred H.
10/22/2025
Hey Jared, did the grease seal set with the included wear sleeve fit your jet ski trailer spindle the way you needed? Knowing how it worked could help others trying to match the same bearing and seal setup.