What is the Height of the etrailer Idler Hub # AKIHUB-545-35-EZ-K, Trying to Replace TDE 11033L
Updated 10/30/2025 | Published 02/12/2025
Question:
3500 pounds 5x4 1/2 pattern. What is the height of the hub you would replace the TDE 11033L with?
asked by: Danny W
Expert Reply:
Hey Danny,
I was able to go out to the warehouse and get the measurements you requested, please refer to the image that I attached. The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-35-EZ-K is going to come with the same bearings as the TDE 11033L, inner bearing L68149, and outer bearing L44649.
Let me know if those measurements match up with what you have, if they do not please make sure to include the measurements that you have.
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Q&A: Replacement Idler Hub for a Dexter 3,500 lbs Axle
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Is Drilling Required For Installation Of Roadmaster Front Anti-Sway Bar on 2026 Jayco Melbourne 24L
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Best Replacement for a Wesbar Tail Light 271594
- Q&A: Dimensions Of P&F Products Interlocking Flooring for Enclosed Trailers - Aluminum PF35FR
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 7 Common Questions Everyone Has About Trailer Tires
Kate F.
10/30/2025
Hey Danny, did the measurements on the Easy Grease hub line up with your old TDE 11033L? Once you confirm those match, it’ll be easier to know if that hub is the right replacement. Your update could make it easier for the next person checking fitment on a 3.5K axle.